Operation Manual

6NC 120 EN
13.Technical Specifications
This device complies with the requirements of the Medical
Device Directive 93/42/EEC.
Technical alterations reserved.
According to the Medical Product User Act a biennial tech-
nical inspection is recommended for professional users.
Please observe the applicable disposal regulations.
14.www.microlife.com
Detailed user information about our thermometers and
blood pressure monitors as well as services can be found
at www.microlife.com.
Type: Non Contact Thermometer NC 120
Measure-
ment range:
Body Mode: 34.0-42.2 °C (93.2-108.0 °F)
Object Mode: 0-100.0 °C (32-212.0 °F)
Resolution: 0.1 °C / °F
Measure-
ment accu-
racy:
Laboratory:
0.2 °C, 36.0  39.0 °C
(0.4 °F, 96.8  102.2 °F)
Display: Liquid Crystal Display, 4 digits plus special
icons
Acoustic: The unit is turned ON and ready for the
measurement: 1 short beep
Complete the measurement:
1 long beep (1 sec.) if the reading is less
than 37.5 °C (99.5 °F), 10 short «beep»
sounds, if the reading is equal to or greater
than 37.5 °C (99.5 °F).
System error or malfunction:
3 short «bi» sounds
Memory: Auto-Display the last measured temperature
30 readings recall in the Memory Mode
Backlight: The display light will be GREEN for
4 seconds, when the unit is turned ON.
The display light will be GREEN for
5 seconds, when a measurement is
completed with a reading less than 37.5 °C
(99.5 °F).
The display light will be RED for 5 seconds,
when a measurement is completed with a
reading equal to or higher than 37.5 °C
(99.5 °F).
Operating
temperature:
Body Mode: 16-40.0 °C (60.8-104.0 °F)
Object Mode: 5-40.0 °C (41-104.0 °F)
Storage
temperature:
-20°C to +50°C (-4°F to 122°F)
15-95 % relative maximum humidity
Automatic
Switch-off:
Approx. 1 minute after last measurement
has been taken.
Battery: CR2032 Battery (X1) 3V - at least 1000
measurements
Dimensions: 120 x 28 x 21 mm
Weight: 39 g (with battery), 36 g (w/o battery)
Reference to
standards:
ASTM E1965;
IEC 60601-1; IEC 60601-1-2 (EMC)