Operation Manual

11
Viewing measurements
1) When the M button is pressed, it displays the total
number of measurements stored, e.g. N=28, followed
immediately by the total number of measurements
with AFIB and then the average of all the
measurements. Every average reading can be viewed
by pressing the M button repeatedly.
Press M button
once again
Press and hold
M button for 7
seconds
Deleting measurements
*
Before deleting data, be sure that the measurement data is
not required. When your BP values are too high or when your
values show AFIB it is recommended to show your BP values
to your doctor.
1) Press the M button and hold it for 7 seconds until the
clear symbol
shows up.
2) Release the M button and press it once more. This will
delete all the measurements.
Viewing and deleting measurements
Total No. of
readings with AFIB
Total No. of
readings
Average
2) The last three individual measurements can be viewed
by pressing and holding the M button until a “1” is
displyed on the screen. The values will be displayed
sequentially.