Use and Care Manual

INTRODUCTION
Your 8” x 12” Variable Speed Wood Lathe is a dependable tool designed to assist you in turning many types of projects.
It is easy to assemble and to operate and is an ideal lathe for those just getting started in wood turning and experienced
users alike.
IMPORTANT: This manual is not intended as a “Teaching Guide” on how to perform wood turning. It describes functions
of the components and gives general information about the lathe. Micro Mark offers books and videos that teach the
processes of wood turning. In addition, there are many sources widely available on the internet, libraries and classes
that one might take in order to achieve professional results.
Take the time to read and understand these Operation and Safety Instructions in order to use this machine to its fullest
potential.
SPECIFICATIONS
Motor: 250W (1/3 hp), 2.3 Amps, 120V 60 Hz
Motor speed: 750 – 3200 rpm
Distance between centers: 12”
Swing over bed: 8”
Drive spindle: 1” x 8 TPI
Drive spindle through hole: 3/8”
Tailstock through hole: 3/8”
Headstock center taper: MT1
Tailstock center taper: MT1
Overall size: 28” x 8.5” x 12”
Net weight: 43 lbs.
2