QUALITY WITHOUT EVERYTHING COMPROMISE ON TAP SINCE 1953 BEER, WINE, COCKTAILS, COFFEE, TEAS OR ANY BEVERAGE WHOLESALE EDITION DISPENSE EQUIPMENT 2019
EVERYTHING ON TAP MEANS EVERYTHING ON TAP KEG / BiB / PRE-MIX / POST-MIX BEER / COCKTAILS / WINE / NITRO COLD BREW / TEA / LEMONADE WATER / KOMBUCHA / COLD BREW / JUICE | 2
TABLE OF CONTENTS HIGHLIGHTS .............................4 -9 TOTAL THE MICRO BEVERAGE MATICSOLUTIONS DIFFERENCE EVERYTHING QUALITY WITHOUT COMPROMISE ON TAP Dear Valued Customer, BEER, WINE, COCKTAILS, COFFEE, TEAS It hardly seems like a year since I last penned the introduction for the catalog. & ALL OTHER 2018 continued in muchBEVERAGES the same vein as 2017 with the amount of draft offerings continuing to increase and consumer’s brand loyalty heading in the other direction.
DIFFERENCE THE MICRO MATIC SINCE 1953 Micro Matic has been helping breweries, retailers and beer lovers enjoy the fresh taste of keg beer for over 60 years. Established in 1953, Micro Matic is recognized as a leading global supplier of draft beer, cocktail, wine, coffee, and other beverage solutions dispensing insolutions over 120 in countries. over 120 countries.
MARKET LEADER WHY MICRO MATIC? Established in 1953, Micro Matic is recognized as a leading global supplier of draft beverage equipment and solutions in over 120 countries. With thousands of customers world-wide we lead the market through innovation, quality and customer service. BEVERAGE DISPENSE SPECIALISTS Micro Matic is the leader of On Tap Solutions for beer, wine, cocktails, coffee, teas or any beverage in various formats (Keg, BiB, Pre-Mix, Post-Mix). The possibilities are truly endless.
MERCEDES-BENZ STADIUM 6 MILES OF TRUNKLINE 60 MILES OF BEER LINE 1264 TAPS 316 TOWERS 83 POWER PACKS LARGEST BEER SYSTEM IN THE WORLD | 6
CERTIFIED INSTALLER NETWORK BRINGING THE BEST FOR YOU The Micro Matic Certified Installers are a national network of hand-picked beverage dispensing experts. We have searched the country for the most reputable and reliable installation companies, who understand and implement our stringent requirements. Each Certified Installer is required to attend an annual comprehensive training course at the Micro Matic Dispense Institute, and their installations are evaluated to ensure consistent quality.
10 KEY ELEMENTS OPTIMIZE QUALITY & INCREASE PROFITS KEG STORAGE TEMPERATURE 38˚ F 1 Dedicate the Walk-In Cooler for Kegs 2 Maintain Carbonation from the First to the Last Glass 3 • Under 38 degrees: impacts taste and impedes "head of foam" formation. • Over 38 degrees: results in foamy beer and pouring profits down the drain. GAS BLENDER • Optimizes quality and maximizes keg yield. • On-site blending of CO2 and nitrogen is less expensive than pre-mixed gas cylinders.
8 KOOL-RITE™ TOWER WITH STAINLESS STEEL FAUCETS 8 Patented Cold Blocks Deliver Optimum Cooling • Modular construction eliminates internal connections and possibility of leaks. • Equipped with stainless steel beer lines, shanks and faucets. 9 7 TRUNKLINE Maintain Cooling, Beer Integrity & Prevent Flavor Migration • Moisture barrier wrap prevents condensation. • BarrierMaster Flavourlock Tubing™ maintains beer integrity and prevents flavor migration.
2019 PRODUCT HIGHLIGHT REVOLUTIONIZING THE WORLD OF BEER. Since 2013, FlexiDraft™ has pioneered a unique solution to a new beer line with every new keg. FlexiDraft™ utilizes a one-way beer line which eliminates the problems common to conventional draft beer systems: hygiene issues and the labor and cost for cleaning and maintenance. Because the beer line in FlexiDraft™ must be changed along with the keg, the risk of contamination is eliminated and thus cleaning can be reduced to a minimum.
2019 PRODUCT HIGHLIGHT A NEW BEER LINE WITH EVERY KEG CHANGE! STEP 1 Open the FlexiDraft™ tower by pressing the two buttons (make sure the keg coupler is disconnected first). The upper part will move forward by itself, then lift. STEP 2 Drop the keg coupler end of the one-way beer line into the tower column. Fix the beer outlet end to the faucet nozzle. Close the tower lid; it will snap securely into place. STEP 3 Push the beer end of the one-way line into the keg coupler.
FIT. PERFORMANCE. PRICE. COUPLER SERIES A Micro Matic valve is the choice in over 70% of the world’s kegs. For confident performance, choose a keg coupler designed to fit the No.1 valve. 7485SS | 12 7485BS 7485BB BREWERY-GRADE BEST VALUE LOW PRICE! Durable construction featuring 304 grade stainless steel body and probe, and stainless steel handle fork. For all beers, wines and ciders. Featuring 304 grade stainless steel probe, chrome-plated forged brass body, and stainless steel handle fork.
COUPLERS D SYSTEM BREWERY-GRADE COUPLER Durable construction featuring 304 grade stainless steel body, probe and handle fork. Use for: Beer, wine, cider PART NO. PROBE MATERIAL BODY MATERIAL HANDLE COLOR SYSTEM 7485SS 304 SS 304 SS Gray D 7485SS D SYSTEM 304 stainless steel BEST COUPLER Featuring 304 grade stainless steel probe, chrome-plated forged brass body and stainless steel handle fork. Use for: Beer, wine, cider PART NO.
COUPLERS S SYSTEM BREWERY-GRADE COUPLER Durable construction featuring 304 grade stainless steel body, probe and handle fork. Use for: All beers, wine, cider S SYSTEM 7486SS PART NO. PROBE MATERIAL BODY MATERIAL HANDLE COLOR SYSTEM 7486SS 304 SS 304 SS Gray S BEST COUPLER Featuring 304 grade stainless steel probe, chrome-plated forged brass body and stainless steel handle fork. Use for: All beers, wine, cider 7486BS PART NO.
COUPLERS KEYKEG™ NEW Dispense head for KeyKeg™ has innovative degassing feature for one-way kegs. Safer, easier and more convenient use. Degassing takes only 10 seconds and no special tools are required. Excellent for beer, wine, coffee, cider, and more. PART NO. DESCRIPTION KK-713-058 KeyKeg KK-713-058 PROBE MATERIAL 304 SS KEYKEG U, G, A & M SYSTEM IMPORT COUPLERS INCLUDING U.S. THREAD ADAPTERS PART NO.
GAS EQUIPMENT ECONOMY REGULATORS BEST SELLER ECONOMY LOW PRESSURE 0 – 60 PSI REGULATOR FEATURES: • Safety relief valve releases at 55 – 65 psi • Permanent quad-ring inlet seal • Flow control inlet nipple filter • Enlarged CO2 port for high volume 842 PART NO.
GAS EQUIPMENT PREMIUM REGULATORS PREMIUM REGULATOR FEATURES: • Forged brass for durability, accurate machining, high-quality chrome-plated finish, built to last. • Built-in CO2 resistant solid nylon inlet seal for consistent, perfect sealing. • Nickel-plated valve seats for high corrosion resistance. • Constant pressure supply at high-output flow rates. • Safety relief valve releases at 55 – 65 psi. 641 642 PRIMARY CO2 PART NO.
GAS EQUIPMENT GAUGE CAGE Protect your investment with a gauge cage. PART NO. DESCRIPTION MM-12593 Complete kit – primary regulator gauge protector, economy, 1 piece, only for 840 series JE-742GCN Complete kit – primary regulator gauge protector, 2 piece NEW MM-12593 MM-12593 JE-742GCN (Shown on 842) (Shown on 642) JE-742GCN (Shown on 842) WALL MOUNT REGULATOR WALL MOUNT PRIMARY CO2 DOUBLE GAUGE REGULATOR PART NO.
MINI SECONDARY REGULATOR MAXIMUM PERFORMANCE MINIMUM SPACE Use less wall space and group pressure regulators. Our new compact Secondary Gas Regulator requires no tools to adjust pressure. — Compact size, less wall space — Easy dial adjustment 5-45 psi — Shutoff included — 3/8" O.D. John Guest barb fittings — Tamper evident dial cover available PART NO. DESCRIPTION 1141-MINI Mini secondary regulator, 1 pressure / 1 product pass-thru barbs NEW COMPACT SIZE! 8" 1141-MINI 6" MICROMATIC.
GAS EQUIPMENT ECONOMY REGULATORS ECONOMY LOW PRESSURE REGULATOR FEATURES: • Safety relief valve releases at 55 – 65 psi • Flow control inlet nipple filter • Enlarged CO2 port for high-volume dispensing PART NO. 8011 8022 DESCRIPTION 8011X 1 pressure / 1 product pass-thru barbs 8011 1 pressure / 1 product 8011-15 1 pressure up to 15 psi / 1 product 8022 2 pressure / 2 product 8033 3 pressure / 3 product 8044 4 pressure / 4 product PART NO.
GAS EQUIPMENT SECONDARY PANEL KITS 83415 INSTALLATION READY – WALK-IN COOLER KITS Includes 304 SS wall brackets and hoses. PART NO. DESCRIPTION 83315 304 STAINLESS STEEL NIPPLE 83115 1 pressure / 1 product 3/8" I.D. 83215 2 pressure / 2 product 3/8" I.D. 83315 3 pressure / 3 product 3/8" I.D. 83415 4 pressure / 4 product 3/8" I.D. 550XFM96WHC Replacement jumper line – 8' x 3/8" I.D.
GAS EQUIPMENT REPLACEMENT PARTS & TOOLS REPLACEMENT GAUGES 624 624-1881 440-18 6603 84073 NEW MPW-6 MP-040 PART NO. DESCRIPTION USE 624-1881 0 – 15 lbs – R.H. threads Output pressure 624-030 30 lbs – R.H. threads reset to zero adjustment Output pressure 624 60 lbs – R.H. threads Output pressure 84073 0 – 120 lbs – R.H. threads Output pressure 6603 3,000 lbs – L.H. threads Tank pressure 5603 3,000 lbs – R.H. threads Tank pressure WRENCH PART NO.
GAS EQUIPMENT ALUMINUM GAS DISTRIBUTORS COMPLETE DISTRIBUTORS 45˚ angle one-piece aluminum manifold includes shutoffs. PART NO. DESCRIPTION 751-017 Two-way 751-018 Three-way 751-019 Four-way 751-020 Five-way 751-021 Six-way 751-018 751-017 COMPONENTS 751-019 PART NO.
BARRIER TUBING OXYGEN IS BAD FOR YOUR BEVERAGE Micro Matic continues to innovate Beer Line Technology through our sister company Valpar. We were the first to market with Gas Barrier Technology standard trunkline, and the first to develop a 5-layer tube. Vinyl tubing is the dirtiest part of any beer system because it is the most difficult to clean. The rough wall surfaces provide perfect pockets for bacteria to settle and grow.
HOSE & FITTINGS HOSE MICRO MATIC PRO-LINE™ VINYL HOSE Pro-Line™ vinyl is performance-based Tygon™ S3 phthalate-free flexible tubing. The glass-like clarity allows the user to see the beer or other beverage flow through for easy visual monitoring. Pro-Line™ vinyl is FDA and NSF compliant. I.D. PART NO. COLOR O.D.
HOSE & FITTINGS JOHN GUEST FITTINGS PI0308S PI0408S PI211008S PI201008S EQUAL ELBOW CONNECTORS EQUAL STRAIGHT CONNECTORS PART NO. STEM O.D. PART NO. PI0306S 3/16" x 3/16" PI0406S 3/16" x 3/16" PI0308S 1/4" x 1/4" PI0408S 1/4" x 1/4" PM0308S 5/16" x 5/16" PM0408S 5/16" x 5/16" PI0312S 3/8" x 3/8" PI0412S 3/8" x 3/8" PI0316S 1/2" x 1/2" PI0416S 1/2" x 1/2" REDUCING ELBOW CONNECTORS REDUCING STRAIGHT CONNECTORS PART NO. STEM O.D. PART NO.
HOSE & FITTINGS HOSE FITTINGS BRASS AND PLASTIC HOSE "T" & "Y" STAINLESS STEEL "T" PART NO. GRADE HOSE I.D. PART NO. DESCRIPTION SST-B2 304 SS 1/4" All MP-060 5/16" brass "T" SST-E2 304 SS 5/16" All WD-013 5/16" plastic "T" SST-C2 304 SS 3/8" All WD-023 1/4" plastic "T" SST-BC 304 SS 1/4" thru x 3/8" inlet WD-073 3/8" plastic "Y" SST-B2 MP-060 CROSS FITTINGS PART NO. GRADE WD-013 HOSE I.D.
HOSE & FITTINGS BEER MANIFOLD PART NO.
HOSE & FITTINGS WALL BRACKETS SHUTOFFS & SWITCHES PART NO. GRADE BORE 543BS 304 SS 3/8" BEER SWITCH FF-020AB 304 SS 3/8" PART NO. GRADE BORE 1894B 303 SS 3/8" 1894B SHUTOFFS 543BS FF-020AB BEER "Y" & ELBOW PART NO. GRADE DESCRIPTION 898B 303 SS 3/8" bore FT872 303 SS Coupler elbow PI491616S Plastic 1/2" x 1/2" x 1/2" PART NO.
HOSE & FITTINGS CLAMPS STEPLESS CLAMPS For barrier hose. Poly Hose Stepless Clamp Vinyl Stepless Clamp PART NO. HOSE I.D. PART NO. HOSE I.D. 95SL 1/4" 133SL 3/16" 105SL 1/4" 145SL 1/4" 113SL 1/4" (Not for BF tubing) 157SL 5/16" 123SL 5/16" 162SL 5/16" 133SL 3/8" 170SL 5/16" 140SL 3/8" O-CLAMPS Single-ear style for vinyl hose. O-clamp Double Ear O-clamp Single Ear Snap Clamp NEW 185SL 3/8" 198SL 1/2" 210SL 1/2" O-CLAMPS Double-ear style for vinyl hose. PART NO.
TAP HANDLES BRAND ON DEMAND Create Unique, Branded Tap Handles Do-it-Yourself with style. Flexible, cost-effective and uniquely designed, the BOD Tap Handle delivers branding and real-time marketing. You can reuse the BOD Tap Handle to promote a seasonal or traditional beer or promote special venues or holidays. Simply re-print the branding label and reuse the BOD Tap Handle again and again.
FAUCETS FAUCETS 304 BODY 304 PART NO. MATERIAL FINISH DESCRIPTION 304 304 stainless steel Polished With stainless steel lever 304G 304 stainless steel PVD brass With stainless steel lever FINISH DESCRIPTION STANDARD BODY PART NO.
FAUCETS FAUCETS CREAMER FAUCET CREAMER FAUCET PART NO. DESCRIPTION CMB-X2CH Stainless steel lever, metal coupling threads and chrome trim 304-CR 304 grade stainless steel, note etched “C” on front end of shaft CMB-X2CH TRIGGER TAP FAUCET PART NO. DESCRIPTION 304-TT 304 grade stainless steel, note etched “TT” on front end of shaft 304-CR NOTE: Etched "C" on front end of shaft CLICK ON. CLICK OFF. 23-41-304 Click 23-41 304-FL 304-TT LOCKS PART NO.
FAUCETS STOUT FAUCET & LOCK STOUT FAUCET A distinctive faucet for use only with stout beers. Features a unique dispensing motion: pull forward for pouring, push backward to finish with a creamy head. PART NO.
FAUCETS EUROSTYLE Update the style of your existing draft tower. PART NO. DESCRIPTION FINISH MM901 304 stainless steel Polished MM902 304 stainless steel PVD brass 4933-FC-SS Flow control faucet, all 304 stainless steel, self-closing creamer, great for filling growlers Polished MM902 MM901 GROWLER FILLER & FAUCET The Micro Matic growler filler / faucet dual-purpose design allows the same shank fitting to either fill growlers or pour pints! There is no need for a dedicated growler filler.
SHANKS SHANKS 1/4'' BORE PART NO. Brass, chrome-plated, smooth surface 304 stainless steel, three etched rings Old shank SPINSTOP shank ™ 4331AS-304 4334AS-304 4337AS-304 3/16'' BORE MATERIAL LENGTH PART NO.
SHANKS DOUBLE FAUCET SHANKS PART NO. NIPPLE SHANK LENGTH BE-DF2-3 3⁄16" 2" BE-DF4-3 3⁄16" 4" BE-DF6-3 3⁄16" 6" BE-DF8-3 3⁄16" 8" BE-DF10-3 3⁄16" 10" BE-DF12-3 3⁄16" 12" NIPPLE SHANKS BE-DF6-3 ELBOW NIPPLES Hex nut not included, order separately. NIPPLE SHANKS Brass, length includes nipple. PART NO. LENGTH FITS HOSE PART NO. DESCRIPTION 4331NA 3 1/2" 1/4" I.D. BE-212-3 1/4" barb 4331NA-3 3 1/2" 3/16" I.D. BE-212-3-304 304 SS, fits 1/4" poly 4333NA 4 1/8" 1/4" I.D.
CRISP, CLEAN BREWERY FRESH MICRO MATIC LINE CLEANER FEATURES: INDUSTRY STANDARD PERFORMANCE – Beer Line Cleaners: Brewers recommend 2 – 3% caustic in solution. – Wine Line Cleaners: Vintners recommend 1% caustic in solution. LATEST ADDITIVE TECHNOLOGY – Optimum cleaning efficiency. – Surfactants (wetting agent) reduce surface tension between the deposit and the cleaning agent. – Surfactant agent enables fast, thorough rinsing – ensuring all the chemical is washed out of the line, leaving no residue.
CLEANING CHEMICALS LIQUID LINE CLEANERS - BEER BEER LINE CLEANER – ALKALINE Designed to attack and dissolve proteins, hop resins, bioflims, bacteria, molds, yeast and other organic soils. PART NO. DESCRIPTION BEER LINE CLEANER – ACID Acid cleaner attacks and dissolves calcium oxalate (beer stone) and other harmful inorganic soils. It is recommended that this product be used after every four or five cleanings.
– OVER 700,000 LINES MANAGED AND GROWING – GLOBAL SUPPORT CENTERS – BREWERY APPROVED REPORTING ® MERGING TECHNOLOGY WITH TRADITION The DraftLine SmartSystem® is a user-friendly application designed specifically to allow for the seamless flow of information between the Service Manager and Technicians throughout all areas of draft maintenance and service.
FOR THE TECHNICIAN - Available for iOS & Android Customer Overview Account Information & Directions Daily Route List Line Cleaning & Service Checklist System Builder Service Trips Reminders DraftLine SmartSystem® is a unique Cloud-based integrated administrator and mobile application* developed to successfully manage your draft service and line cleaning tasks.
CLEANING EQUIPMENT FLUSHERS D AND S SYSTEM BEFORE COUPLING System D and U PART NO.
RE-CIRCULATING BEER LINE CLEANING THE BEST CLEANING METHOD Electric line cleaning pumps provide turbulent circulation which is 80 times more effective than simply soaking a beer line. TEMPERATURE RESISTANT HOSE – BUILT-IN TIMER – Brewers Association Easy-to-use, flexible in all weather conditions. cleaning standard is 15 minutes. ROBUST – Stainless steel exterior case USER-FRIENDLY – Body mounted for durability.
CLEANING EQUIPMENT FOUR HEAD CLEANING CAN 18 LITER STAINLESS STEEL CLEANING CAN Create your own custom cleaning can with the valves you use. Stainless steel containers should never be used with cleaning chemicals containing chlorine. Always verify ingredients before use. PART NO.
CLEANING EQUIPMENT ECONOMICAL PRESSURIZED CLEANING BOTTLE CAPS PART NO. DESCRIPTION M801147KS D System M808033KS S System M808041KS U System M808053KS A System M808051KS G System CLEANING BOTTLES Make it quick and easy to clean picnic pumps, direct draw boxes, and short run beer systems. Available with interchangeable bottle caps to fit most couplers. COMPLETE ASSEMBLIES Includes bottle, cap and dip tube. PART NO. DESCRIPTION LITER / GAL M801135KS M System M5-801147 D System 5 / 1.
A CLEAN GLASS PROMISES FRESH BEER TASTE! BEER CLEAN GLASS RESULTS – Enhanced aroma and taste. – Retains a thick, creamy, foam head. Lacing effect after every sip – Beer is sparkling clear and free of gas bubbles. – Repeat business and added profits. Head should remain intact BEER CLEAN GLASS FACTS – All glasses should be washed at least once a day. – Odors and invisible film from smoke can occur in a matter of hours. – Avoid petroleum-based detergents – they leave an oily residue, destroying a foam head.
CLEANING EQUIPMENT GLASS CLEANING CHEMICALS A beer clean glass is essential for serving the best tasting beer and realizing the most profit from a keg. POUCH PACKS Sold only in packages of 100 pouches. 90221 PART NO. DESCRIPTION PACKAGED 90221 Glass cleaner – manual 100 / 1/2 oz 90224 Glass cleaner – electric 100 / 1/2 oz 90223 Sanitizer 100 / 1/4 oz 90224 90223 BULK TUBS Sold only as individual tubs. PART NO.
TOOLS & KEG EQUIPMENT THERMOMETERS 556 JE-3215 JE-3200 DESCRIPTION 556 Spirit thermometer with case (0˚ to 120˚ F) JE-3215 1" Dial thermometer with case (0˚ to 220˚ F) JE-3200 Digital thermometer with pocket case 1" face (-40˚ to 120˚ F) PDT300 Slim digital waterproof thermometer with pocket case (-58˚ to 300˚ F) C816FS Laser thermometer (0˚ to 400˚ F), measure temperature from a distance ST1236-31 Walk-in cooler thermometer TOOLS PDT300 C816FS ST1236-31 4350-HD MP-042 MM-14100407 MP-04
TOOLS & KEG EQUIPMENT 7000 & 8000 SERIES BRUSHES 7000 & 8000 Series brushes are designed specifically to clean faucets without causing damage or compromising the brush. Unlike similar brush styles, these bristles remain upright while scrubbing in both directions, rather than bending over and back. This results in less abrasion to the internal surface of your faucets for a longer life and consistent clean. PART NO. USE BRISTLE MATERIAL BRUSH DIMENSIONS / DESCRIPTION 7350-US U.S.
TOOLS & KEG EQUIPMENT KEG HANDLING KT10 KEG TAGS Save walk-in cooler time and labor when making keg changes. Our easy-to-use keg tags are an efficiency must for every walk-in cooler. PART NO. DESCRIPTION KT10 10 keg tags with zip ties DURABLE KEG JACKETS Insulate kegs keeping the cold in. 5 1/2" slot for easy party pump tapping. PART NO. DESCRIPTION KJ-01 Red vinyl MM-PKJ Canvas HEAVY-DUTY KEG MATS / BUMPERS Guaranteed to be durable enough for your toughest needs. KJ-01 MM-PKJ PART NO.
TOOLS & KEG EQUIPMENT KEG SHELVING ALUMINUM KEG SHELVING Organize a walk-in cooler with aluminum keg shelving. FEATURES: • Holds all keg sizes • Heavy-duty lightweight aluminum • Easy load square-bar shelves • Bullet feet adjust to 1 1/2" • Easy assembly, ships flat • Shelves bolt to posts with anti-slip clamps • Optional U-frame for side containment • 3-shelf models available PART NO.
DISPENSE SYSTEMS CASK CONDITIONED BASIC SYSTEM BASIC SYSTEM WITH BEER ENGINE SPILE EXTENDED SHELF LIFE (CO2 SYSTEM) BEER ENGINE SHIVE CASK TAP, GRAVITY KEYSTONE CASK TAP, THREADED LONG DRAW SYSTEM CASK BREATHER CASK BREATHER SPIGOT SHIVE BEER PUMP BEER ENGINE CHECK VALVE KEYSTONE TAP | 52 STILLAGE
CASK CONDITIONED DISPENSE SYSTEMS BEER ENGINES Cask conditioned beer is brewed from traditional ingredients and allowed to mature naturally. The unfiltered, unpasteurized beer still contains live yeast, which continues conditioning the beer in the cask (firkin); this process creates gentle, natural carbonation. Cask beers are dispensed without using CO2 gas and instead by manually pulling it from the cask with a beer engine (hand pump).
CASK CONDITIONED DISPENSE SYSTEMS CASK WIDGE The cask widge is an upright dispense system for casks; a flexible hose with a floating filter draws the beer from just below the beer surface in the cask. The floating filter follows the beer down until it reaches the bottom of the cask. By taking beer from below this surface layer, any oxygenation and contamination is prevented from spreading down into the beer below, keeping the beer in its best condition.
CASK CONDITIONED DISPENSE SYSTEMS CASK SUPPLIES CASK TAPPING PART NO. DESCRIPTION CASK-TAP-G Gravity dispense tap CASK-TAP Cask tap 3/4" thread CASK-NUT Cask tap nut 3/4" CASK-TP Cask tap tail 3/4" CASK-HF Hop filter 3/4" CASK-S Wooden stillage CASK-TAP-G F.O.B. IL CASK-TAP CASK-S CASK-NUT CASK-TP CASK-HF ACCESSORIES PART NO.
DESIGNER TOWERS FROM MICRO MATIC INCREASE DRAFT BEER SALES The draft beer tower is not just a bar fixture, it is a marketing tool to help increase draft beer sales. The different shapes, finishes and sizes of the draft beer tower are designed to complement your décor and enhance the point of sale.
Titan™ Mushroom Plus Mystique Double Pedestal / Double Service Ceramic Single Column Skyline Metropolis™ H Zenith Anaconda Edge Pass Thru Falco T-Tower Biergarten™ Zeus Paris MICROMATIC.
CHALLENGE US WITH YOUR VISION CUSTOM TOWER SOLUTIONS Micro Matic has established its reputation in the industry as a leading provider of draft dispensing equipment. Our Design Center has created uniquely crafted draft towers to fit the most discriminating bars of world-class hotels, restaurants, clubs, and venues. The draft beer experience begins at first glance. In addition to producing custom components for your draft system, we offer a wide range of products to complete the installation.
If you think it, we will build it We work with you to build and design your dream • One faucet or one hundred faucets • Mounted from the ceiling • Wrap around a bar top corner • Color? Choose from hundreds BEST-IN-CLASS LEAD TIME IN THE INDUSTRY • Finish? Polished or brushed stainless steel and non-tarnish PVD ORDER TODAY! • One-off design, or production run for multi-chain concept DREAM IN COLOR Custom colors for a crafted look Choose a draft tower and a custom color to complement your bar top.
POURS COLD. EVERY TIME. NO LEAKS. EVER.
NEW INNOVATION NEW KOOL-RITE™ FLOW CONTROL SHANKS CONTROL AT THE POINT OF DISPENSE. 751-500-304-FC COMPENSATOR 3.5" NEW 751-500-304-FCL Everything that makes Kool-Rite™ technology the choice in glycol dispensing, now with flow adjustment at the faucet. It’s easy to replace existing Kool-Rite™ shanks in the field. Simply unscrew and replace with a built-in flow control shank or order your Kool-Rite™ tower with flow control shanks installed. PART NO. 4.
KOOL-RITE™ MODULES ENGINEERING THE POUR The foundation of dispensing draft beer is keeping it consistently cold, at every stage from keg to glass. Since its introduction, Kool-Rite™ technology revolutionized the dispense industry. Kool-Rite™ guarantees cold beer at the point of dispense – first pour, every pour – with leak-free performance. Kool-Rite™ modules feature 304 grade stainless steel, ensuring the integrity of every beer poured.
DRAFT TOWER PORTFOLIO KOOL-RITE INSERT™ Kool-Rite™ technology is the foundation for most of our glycol-cooled towers. The Kool-Rite™ insert is available as an independent module, allowing for creative enclosures to surround it. Create a tower unique to the on-premise design or mount directly through a wall. The possibilities with a Kool-Rite™ insert are only limited by imagination.
CUSTOMS – Unlimited number of faucets – Mount from ceiling, wrap around corners – Special finishes and powdercoat colors – All with Kool-Rite™ technology – Made in the USA BREWERY PIPE AD BREWERY PIPE SERIES CRAFT THE BREWERY LOOK FOR YOUR BAR TOP BIERGARTEN™ – 3" diameter pipes Faucet knobs are not included.
DRAFT TOWER PORTFOLIO BIERGARTEN™ The Biergarten™ series offers a brewery-pipe style but with slimmed down proportions. The design features contrast between the 3" diameter uprights and crossbar and 6" flanges. Biergarten™ towers are constructed from stainless steel tubes finished to a high polish. Provide choice for draft beer customers: 8, 10, and 12 faucet towers in-stock! The Biergarten™ series 304 stainless steel faucets are all glycol cooled using Kool-Rite™ technology. F.O.B.
DRAFT TOWER PORTFOLIO TITAN™ 19 3/4" Brewery-pipe style with heroic proportions characterizes the Titan™ series. Impressive, eye-catching 4" diameter uprights and crossbar are contrasted with 7" flanges. The Titan™ series body is constructed with heavy-duty stainless steel tubes and flanges polished to a tarnish-resistant, mirror-like finish. Titan™ series towers feature glycol cooled 304 stainless steel faucets using Kool-Rite™ Technology. Available in two styles: U-shape or Y-shape.
DRAFT TOWER PORTFOLIO TITAN™ TITAN™ "L" – 4" COLUMN Kool-Rite™ (glycol cooled) includes: 304 stainless steel faucet & shank with 1/4" O.D. tube. NSF certified. PART NO.
OUR EXCLUSIVE TOWER DESIGN METROPOLIS METROPOLIS "WM" Save valuable counter space with this impressive wall mount tower. METROPOLIS "T" Our most popular tower! METROPOLIS "HH" 36 faucets in stock – now that’s offering choice.
DRAFT TOWER PORTFOLIO DRAFT TOWER PORTFOLIO METROPOLIS™ "T" "T" STYLE TOWERS Our popular Metropolis™ series offers a dramatic art deco look. Choose either polished stainless steel or tarnish-free PVD brass finish for a durable draft tower. 24" 4" COLUMN Kool-Rite™ (glycol cooled) includes: 304 stainless steel faucet & shank with 1/4" O.D. tube. NSF certified. PART NO.
DRAFT TOWER PORTFOLIO METROPOLIS™ "M" "M" STYLE TOWERS Our popular Metropolis™ series offers a dramatic art deco look. Choose either polished stainless steel or tarnish-free PVD brass finish for a durable draft tower. 3 PEDESTALS – 4" DIAMETER COLUMN Kool-Rite™ (glycol cooled) includes: 304 stainless steel faucet & shank with 1/4" O.D. tube. NSF certified. PART NO.
DRAFT TOWER PORTFOLIO METROPOLIS™ "HH" "HH" STYLE TOWERS Metropolis™ now offers more choice on tap – up to 36 faucets! Clean design is a hallmark of our Metropolis™ series. The HH edition shows off the contrast of 4" upright diameter tubes with 3" diameter cross tubes. 4 PEDESTALS – 4" DIAMETER COLUMN Kool-Rite™ (glycol cooled) includes: 304 stainless steel faucet & shank with 1/4" O.D. tube. NSF certified. FINISH LENGTH OUTLET RESTRICTION DISPENSE SYSTEM METRO-HH-30PSSKR PART NO.
DRAFT TOWER PORTFOLIO METROPOLIS™ "H" 4" COLUMN Kool-Rite™ (glycol cooled) includes: 304 stainless steel faucet & shank with 1/4" O.D. tube. NSF certified. PART NO. Faucet knobs are not included.
DRAFT TOWER PORTFOLIO METROPOLIS™ "H" AIR COOLED The popular Metropolis™ series is expanded to include air cooled models. These H-style towers are specially constructed for excellent flow-thru air cooling with larger diameter pedestals and crossbar. Metropolis™ towers are polished stainless steel for a durable mirror-like finish. 5" COLUMN SPINSTOP™ (air cooled) includes: 304 stainless steel faucet & shank with 5 ft x 3/16" I.D. vinyl. PART NO.
SPINSTOP™ KEEPING BEER FAUCETS UPRIGHT TRADITIONAL vs. Integral "Anti-Rotation Flats" stops the spin! • Improve system efficiency – no down-time • Saves time and money SPINSTOP™ NOW IN MANY AIR COOLED TOWERS • Reduces service calls • Eliminate the possibility of kinks in the beer line Faucet knobs are not included.
DRAFT TOWER PORTFOLIO PASS THRU 4" TUBE AIR COOLED SPINSTOP™ (air cooled) includes: Standard U.S. faucet with brass body & shank with 5 ft x 3/16" I.D. vinyl hose. PART NO.
DRAFT TOWER PORTFOLIO DOUBLE PEDESTAL 4" COLUMN AIR COOLED SPINSTOP™ (air cooled) includes: Standard U.S. faucet with brass body & shank with 5 ft x 3/16" I.D. vinyl hose. PART NO.
DRAFT TOWER PORTFOLIO DOUBLE SERVICE Give your customers more choice! Draft variety and fast service from both sides of the tower. DOUBLE SERVICE – 4" COLUMN Kool-Rite™ (glycol cooled) includes: 304 stainless steel faucet & shank with 1/4" O.D. tube. NSF certified. PART NO.
DRAFT TOWER PORTFOLIO T-TOWER – 3" COLUMN AIR COOLED SPINSTOP™ (air cooled) includes: Standard U.S. faucet with brass body & shank with 5 ft x 3/16" I.D. vinyl hose. PART NO.
DRAFT TOWER PORTFOLIO T-TOWER – 4" COLUMN AIR COOLED SPINSTOP™ (air cooled) includes: Standard U.S. faucet with brass body & shank with 5 ft x 3/16" I.D. vinyl hose. PART NO.
DRAFT TOWER PORTFOLIO MUSHROOM 7 1/2" COLUMN AIR COOLED SPINSTOP™ (air cooled) includes: Standard U.S. faucet with brass body & shank with 5 ft x 3/16" I.D. vinyl hose. MTB-4PSSKR 12 1/8" PART NO.
DRAFT TOWER PORTFOLIO ZEUS CERAMIC GREEN CERAMIC KOOL-RITE™ (GLYCOL)* Tube Assembly: 1/4" O.D. stainless steel, 7 1/2 lbs restriction. GREEN CERAMIC AIR COOLED Hose Assembly: 5 ft x 3/16" I.D. vinyl hose. PART NO. FAUCETS FINISH DISPENSE SYSTEM PART NO.
24 3/8" 12 Faucets 7 3/4" CT500-12 CT500-3 VIENNA Best selling body style, sleek lines complement transitional to modern designs. 6 1/8" CT100-3 BLACK FOREST Traditional style, but slimmer body and smaller footprint. CERAMIC TOWERS EACH TOWER UNIQUE, EACH TOWER A WORK OF ART. We present the finest quality ceramic beverage dispensing towers. Sculpted by hand and hardened by heat, with skillfully applied glazes for a long-lasting finish.
24 7/8" 22" 18" 6 1/8" 7 3/4" 18" 5-6 Faucets 6 1/8" CT300-4 CT400-4 CT400-6 CT200-1 MONACO BRAUMEISTER The shortest overall height, with sleek, simple styling. 6 1/8" CT600-4 REMBRANDT Popular body features traditional beer hall tower styling. Original body style popular for its simplicity and charm. ROMAN Shorter height with strong lines for a modern, industrial style.
DRAFT TOWER PORTFOLIO CABINET DISPENSER This all-in-one deluxe stainless steel cabinet and drip tray features radius corners. The front panel is removable for servicing. Two 4" holes cut into the bottom are for beer and glycol lines. COMPLETE (SET–UP FOR GLYCOL) Kool-Rite™ (glycol cooled) includes: 304 stainless steel faucet and shank with 1/4" O.D. tube. NSF certified. SB520-KR PART NO.
DRAFT TOWER PORTFOLIO UNDERCOUNTER MOUNT TOWER & DRAINER UNDERCOUNTER MOUNT TOWER Gain limited bar top space with our undercounter mounted tower series. The body features a brushed stainless steel finish and integrated mounting flanges. Complete with Kool-Rite™ glycol cooling. Kool-Rite™ (glycol cooled) includes: 304 stainless steel faucet & shank with 1/4" O.D. tube. NSF certified. PART NO.
DRAFT TOWER PORTFOLIO KRONOS™ Save space and serve cold beer with our wall mount draft tower Kronos™. The brushed stainless steel finish with polished stainless steel faucets provide an eye-catching, hygienic stage for "what‘s on tap!" The drain is hidden behind a brushed stainless steel skirt for a clean appearance. Kronos™ is excellent for modular multi-faucet installations. For example, combine two 10 faucet Kronos™ for a show-stopping 20 faucet draft beer station.
DRAFT TOWER PORTFOLIO SKYLINE BEER STATION Towering high above the bar top at almost 18" Skyline is true to its namesake. Rising across the bartop like skyscrapers on the city skyline, the Skyline tower makes a crisp silhouette with its angled cap. Install Day Ready: Modular construction is pre-plumbed for easy installation. Every Day Ready: Hygienic dispense point for draft beer.
DRAFT TOWER PORTFOLIO ANACONDA NEW Draw attention to "what’s on tap" with the sexy curves and flowing lines of this tower. 304 Series stainless steel faucets are standard. See available options (pg. 91). PART NO.
DRAFT TOWER PORTFOLIO PLUS The elegant arc of the Plus tower rises from the bar top. A chrome plated surface ensures mirror-like reflections to grab attention. Available with lighted LED medallions. 304 series stainless steel faucets are standard. See available options (pg. 91). PART NO.
DRAFT TOWER PORTFOLIO COBRA™ A sculpted classic, Cobra™ draft towers demand attention to "what's on tap." Equipped with Micro Matic 304 stainless steel faucets and available with either a smooth or ice frosted exterior. ICE COBRA™ – ICE TOWERS REQUIRE SEPARATE POWER PACK. PART NO.
DRAFT TOWER PORTFOLIO MYSTIQUE Beautiful modern sculpture for the bar top. Mystique’s unique spilt design has a sensuous elegance sure to draw admiration and sales for "what’s on tap." Consider Mystique in a singular showcase setting or in groups for added excitement. Available in smooth exterior non-ice, ice and medallion versions. See available options listed below. GLYCOL COOLED – CLEAN EXTERIOR PART NO.
DRAFT TOWER PORTFOLIO SINGLE 3" COLUMN 3" ABS PLASTIC Plastic is a better insulator than metal. Air cooled only. NSF certified. Knobs included. Not SPINSTOP™ shanks. 12 1/4" DS-431-211 PART NO. FAUCETS FINISH DS-431-211 1 Black DS-531-211 1 Chrome DS-432-211 2 Black DS-532-211 2 Chrome 14" 3'' SHOTGUN Air cooled only. DS-532-211 PART NO. FINISH D4743SGPSS Polished SS D4743SGBR Brass D4743SGPSS D4743SGBR 3" METAL COLUMN AIR COOLED SPINSTOP™ (air cooled) includes: Standard U.S.
DRAFT TOWER PORTFOLIO SINGLE 4" COLUMN AIR COOLED SPINSTOP™ (air cooled) includes: Standard U.S. faucet with brass body & shank with 5 ft x 3/16" I.D. vinyl hose. PART NO.
DRAFT TOWER PORTFOLIO TOWER RISERS Filling growlers can be awkward due to the height of the beer faucet and countertop. Often there is not enough clearance for the growler jug. Our 2-piece growler risers are easy to install, with no need to remove the beer line. After unscrewing the tower from the countertop, simply lift the tower, place the riser under it, then using the supplied long bolts, re-attach the tower. PART NO.
DRAFT TOWER PORTFOLIO ADDITIONAL TOWERS FLEXIDRAFT™ TOWER FlexiDraft™ is the revolutionary way to ensure draft beer quality. In minutes, the probe, beer line and faucet spout assembly is replaced with each keg change. More info on the system on page 10, see page 14 for keg couplers, and page 33 for beer line assemblies. PART NO. FINISH FD-T-1 FlexiDraft™ tower, 3" column 12" 2 1/2" COLUMN Hose assembly: 5 ft x 3/16" I.D. air cooled only. *NSF certified. PART NO.
SPINSTOP™ NOW IN ALL AIR COOLED TOWERS TOWER ADAPTERS ADD A FAUCET, ADD PROFITS! Tower Adapters allow you to easily add new products to your direct draw dispense systems. DT-2HK Change a single faucet tower into a three faucet tower. DT-1HK Change a two faucet tower into a three faucet tower. DT-2HLK Change a single faucet tower into a two faucet tower. Reuse original shank in tower adapter. PART NO.
DRIP TRAYS SINGLE GLASS RINSER NEW PORTABLE InstaRinse® portable glass rinser is perfect for beer festivals, events and tastings! Features: • Durable anti-microbial plastic components. PVC- and BPA-free tubing. • Spring-activated switch sprays only when pressed, ensuring maximum battery life. • Powered by 8 AA batteries (not included). • Rinse capacity of 90 gallons of water per set of batteries. PART NO.
CUSTOM DRIP TRAYS MATCHING IN STYLE We stock hundreds of drip trays that coordinate with our stock towers.
DRIP TRAYS SURFACE MOUNT SERIES Includes a threaded drain nipple with nut. 1/2" I.D. drain hose attaches to drain nipple (3 1/2" x 5/8"-18). 5" WIDE – CENTERED DRAIN STAINLESS STEEL PART NO. DP-120 LENGTH 12" no drain PVD WITH SS TRAY PART NO.
DRIP TRAYS BEVEL EDGE SERIES Includes a threaded drain nipple with nut. 1/2" I.D. drain hose attaches to drain nipple (3 1/2" x 5/8"-18). PART NO. DP-420D DIMENSIONS FINISH DP-420D 9"L x 6 1/2"W SS DP-420LD 16"L x 6 1/2"W SS DP-420DSSPVD 9"L x 6 1/2"W PVD with SS DP-420LDSSPVD 16"L x 6 1/2"W PVD with SS DP-420LD FLUSH MOUNT SERIES Includes a pipe thread drain nipple (1 3/4" x 1/2" NPT). Order DDN adapter for use with a drain hose. DP-220D PART NO.
DRIP TRAYS PLATFORM European style drip trays with a built-in glass rinser. Add some dispense excitement to each glass by simply inverting the beer glass and pushing down on the built-in sprayer. A wetted glass makes pouring the perfect glass of draught easier. Trays are constructed of heavy gauge stainless steel with a durable metal rinser. Cold water connection required. PART NO. FAUCETS FINISH O.D.
DRIP TRAYS WALL MOUNT SERIES Includes a pipe thread drain nipple (1 3/4" x 3/4" NPT). Order: DDN or P709-88 for use with a drain hose. Brushed stainless steel with metal grill. DP-6X4 DP-321D-1 H D W DP-322D-2 PART NO.
DRIP TRAYS SPINSTOP™ D STRIP ELIMINATE ROTATING SHANKS Secure thru-the-wall shanks from loosening and rotating. Micro Matic SPINSTOP™ D Shanks lock into the patented D-hole mounting strip. Easy to install. Effective way to eliminate service calls for loose shanks. Available in three different hole center dimension configurations. Pair with corresponding wall mount drip tray. D STRIPS PART NO. LENGTH SHANK HOLES HOLE CENTERS DP-WM-MS4-3 11 3/4" 4 3" DP-WM-MS4-3.
DISPENSE SYSTEMS GLYCOL COOLED REMOTE BEER SYSTEM GAS BLEND LINE #2 70% CO2 & 30% N used for lagers and ales. The Power Pack is used to refrigerate a mix of water and glycol which is re-circulated at a temperature between 29 – 32˚ F. This maintains a brewery recommended keg storage temperature of 38˚ F. Glycol-cooled systems are not designed to lower beer dispensing temperatures. The system is designed to deliver beer at the same temperature as the walk-in-cooler.
CUT-AWAY VIEW, KOOL-RITE™ TECHNOLOGY DROP-IN MODULE FABRICATION PATENTED DOUBLE "D" COLD BLOCK Direct contact with copper coolant line and leak proof shank, supplying continuous transfer of coolant temperature to the point of dispense. COPPER COOLANT LINE Direct contact and held in place with cold block secure tabs THERMAL FOIL TAPE Improves cooling transfer between coolant and product lines. TRIPLE LAYER INSULATION SYSTEM FOAM INSULATION Tower insert is completely filled for temperature control.
PRO-LINE POWER PACKS POWERFUL PERFORMANCE. DELIVERING THE BEER COLD. PROVEN RELIABILITY EASY MAINTENANCE QUIET OPERATION ENERGY EFFICIENT SMALL FOOTPRINT PROVEN PERFORMERS UP TO 1 1/2HP AND 11,500 BTUs FEATURES SIGHT GLASS FOR BATH LEVEL -- Verify glycol level without removing lid DIGITAL THERMOSTAT -- Continuous bath temperature display -- No-guess readability -- Adjustable temperature control PUMP (2,600+ BTU MODELS) -- Vane pump | 106 ETL Listed.
DETERMINE POWER PACK SIZE USE BTUs INSTEAD OF LENGTH OF RUN NEW! REMOTE MODELS NOW AVAILABLE Select the most efficient power pack for a beer system by calculating its total BTU (British Thermal Unit) load. Each power pack’s BTU capacity is a numerical expression of the heat it can remove from a beer system as it circulates glycol. Each beer system has a unique BTU load that it exerts on the power pack chilling the glycol.
PRO-LINE™ POWER PACKS MMPP4300-35 MMPP4301-PKG 1,700 BTU 2,300 BTU PART NO. MMPP4300-35 MMPP4301-EP MMPP4301 MMPP4301-WC MMPP4301-PKG MMPP4301-PKG-WC CONFIGURATION Self-Contained Self-Contained Self-Contained Self-Contained Self-Contained Self-Contained Air Cooled Air Cooled Air Cooled Water Cooled Air Cooled Water Cooled 1/4 HP 1/3 HP 1/3 HP 115 115 115 5-15P 5-15P L5-30P L5-30P 4.5 Gallons 5 Gallons 11.
PRO-LINE™ POWER PACKS NEW MMPP4302 MMPP4302-PKG-R 3,600 BTU PART NO. CONFIGURATION TYPE MMPP4302 MMPP4302-R MMPP4302-WC MMPP4302-PKG MMPP4302-PKG-R MMPP4302-PKG-WC Self-Contained Remote Self-Contained Self-Contained Remote Self-Contained Air Cooled Air Cooled Water Cooled Air Cooled Air Cooled Water Cooled L5-30P 5-15P L5-30P 2 2 1/2 HP COMPRESSOR 115 VOLTS PLUG TYPE 5-20P 5-15P 5-20P 11.5 Gallons BATH CAPACITY Vane with 1/3 HP Motor PUMP TYPE NO.
PRO-LINE™ POWER PACKS NEW MMPP4303-PKG-R MMPP4303-PKG-3 5,100 BTU PART NO. CONFIGURATION TYPE MMPP4303-PKG MMPP4303-PKG-R MMPP4303-PKG-WC MMPP4303-PKG-3 MMPP4303-PKG-3-R Self-Contained Remote Self-Contained Self-Contained Remote Air Cooled Air Cooled Water Cooled Water Cooled Air Cooled 6-20P 6-15P 2 3 3 30" X 18" X 28.75" 30" X 28" X 29.75" 175 LBS 200 LBS ETL LISTED ETL LISTED 3/4 HP COMPRESSOR 208/230 VOLTS PLUG TYPE 6-15P 6-15P 11.
PRO-LINE™ POWER PACKS NEW MMPP4305-PKG-R MMPP4305-PKG-3 7,250 BTU PART NO. CONFIGURATION TYPE MMPP4305-PKG MMPP4305-PKG-R MMPP4305-PKG-WC MMPP4305-PKG-3 MMPP4305-PKG-3-R MMPP4305-PKG-WC3 Self-Contained Remote Self-Contained Self-Contained Remote Self-Contained Air Cooled Air Cooled Water Cooled Air Cooled Air Cooled Water Cooled 6-20P 6-15P 6-15P 3 3 1 HP COMPRESSOR 208/230 VOLTS PLUG TYPE 6-15P 6-15P 6-15P 11.
PRO-LINE™ POWER PACKS MMPP4307-PKG-WC MMPP4307-PKG 11,500 BTU PART NO. CONFIGURATION TYPE MMPP4307-PKG MMPP4307-PKG-R MMPP4307-PKG-WC MMPP4307-PKG-3 Self-Contained Remote Self-Contained Self-Contained Air Cooled Air Cooled Water Cooled Air Cooled 6-20P 6-20P 2 3 37" X 18.75" X 31.5" 38" X 30" X 36" 295 LBS 295 LBS ETL LISTED ETL LISTED COMPRESSOR 1 1/2 HP VOLTS 208/230 PLUG TYPE 6-20P 6-15P 11.5 Gallons BATH CAPACITY Vane with 1/3 HP Motor PUMP TYPE NO.
PRO-LINE™ POWER PACKS NEW MMPP4307-PKG-3-R MMPP4307-PKG-4 11,500 BTU PART NO. CONFIGURATION TYPE MMPP4307-PKG-3-R MMPP4307-PKG-3-WC MMPP4307-PKG-4 MMPP4307-PKG-4-WC Remote Self-Contained Self-Contained Self-Contained Air Cooled Water Cooled Air Cooled Water Cooled 6-20P 6-20P 3 4 4 37" X 18.75" X 31.5" 38" X 30" X 36" 37" X 28.75" X 31.5" 295 LBS 295 LBS 295 LBS ETL LISTED ETL LISTED ETL LISTED COMPRESSOR 1 1/2 HP VOLTS 208/230 PLUG TYPE 6-15P 6-15P 11.
GLYCOL COOLED BEER DISPENSE SYSTEMS POWER PACK REPLACEMENT PARTS In order to identify the correct replacement parts, please note both the model number and serial number of the power pack. • MMPP4307 • MMPP4305 • • • MMPP4303 • • • MMPP4302 MMPP4305 • • MMPP4301 MMPP4303 • • MPP4301-EP MMPP4302 PP4301-PA MANUFACTURED 2015 – PRESENT MMPP4301 PP4301-KEY MMPP4301-EP MANUFACTURED 2007 – 2014 • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • PART NO.
GLYCOL COOLED BEER DISPENSE SYSTEMS GLYCOL WHAT SIZE GLYCOL BATH ARE YOU FILLING? POLAR-FLO (GALLONS) WATER (GALLONS) SOLUTION (GALLONS) 1/2 + 1 1/4 = 1 3/4 1 + 2 1/2 = 3 1/2 1 1/2 + 3 3/4 = 5 1/4 2 + 5 = 7 2 1/2 + 6 1/4 = 8 3/4 3 + 7 1/2 = 10 1/2 3 1/2 + 8 3/4 = 12 1/4 • • • • 100% USP grade propylene glycol Acts as a lubricant, prolonging pump life Flush and refill glycol baths annually Mix with 2 1/2 parts water 7084VP 60703 NOTE: Glycol bath mix for 1 HP and 1
TRUNKLINE THE MOST TECHNOLOGICALLY ADVANCED BEER TRUNKLINE IN THE INDUSTRY. FACT. With the exclusive BARRIERMASTER FLAVOURLOCK™ TUBING and patented BLACK DIAMOND® JACKET we have the best in class trunkline with best in class service: • Delivered fast from 4 regional warehouses. • More configurations than any competitor. • Commonly cut and shipped the same business day. BARRIERMASTER FLAVOURLOCK™ TUBING • Ultra smooth inner co-polymer layer to reduce bacteria adhesion.
GLYCOL COOLED BEER DISPENSE SYSTEMS BARRIERMASTER FLAVOURLOCK Beverages: Beer, wine, juice, cold coffee and tea, soda, liquor, water, etc. 1/4" TRUNKLINE PART NO. BTUs PRODUCT LINES I.D. .30 RESTRICTION PER FOOT – 15 oz BEER PER 50 FT GLYCOL LINES I.D. BLACK DIAMOND® JACKET BUNDLE O.D. CDI242-BF 5.9 2 1/4" 2 3/8" Yes 2 3/4" CDI442-BF 6.3 4 1/4" 2 3/8" Yes 2 3/4" CDI542-BF 6.5 5 1/4" 2 3/8" Yes 2 3/4" CDI642-BF 6.5 6 1/4" 2 3/8" Yes 2 3/4" CDI842-BF 7.
IN-LINE PROFIT MAXIMIZER TM WE GIVE YOU CHOICE! PRO-MAX-MM – Manufactured of 304 Grade Stainless Steel & ABS Plastic NEW RE-ENGINEERED – Reverse inlet and outlet positions – Instruction labels on both sides – Large beer chamber for easy viewing – Bleed-off drain swivels 360° – Stainless steel hose connections – Easily disassembles in minutes – Removable, reversible mounting bracket for complete cleaning PART NO.
MAXIMIZE PROFITS & MINIMIZE BEER LOSS PRO-MAX™ reduces pour cost and pays for itself after as few as 6 keg changes. With PRO-MAX™ In-Line Profit Maximizer,™ the beer line remains full when the keg empties. There is no need to re-fill the beerline – this reduces waste and maximizes glasses per keg. LET’S DO THE MATH! REDUCE POUR COST BY $7.50 PER KEG CHANGE The following table shows the amount of beer-loss each time a keg empties without a Profit Maximizer™ installed.
POLARplate™ ANSWERING THE CALL FOR EXTRA COLD BEER Innovative In-Line Cooling Technology POLARplate™ technology uses existing glycol cooling lines to reduce the pour temperature. • Self-contained • Install in existing long draw systems • Available in 1, 4, 6 & 8 tap • No electricity required • Easy in-line installation • Space-saving under counter installation PART NO.
BEERBLAST® ON-SITE NITROGEN GENERATION PROTECT THE BEER & GENERATE PROFITS BeerBlast® KPH nitrogen generator and mixed gas dispense system increases profits, eliminates over or under-carbonation and improves draft beer quality. Use state-of-the-art technology to reduce operating costs and yield premium beverage grade nitrogen. These lightweight and compact units are easy to install and are provided with turn-key blends applicable to beer, wine or coffee.
GAS BLENDERS MAINTAIN CARBONATION FROM THE FIRST GLASS TO THE LAST • System performance is optimized and keg yield improved by maintaining recommended carbonation levels. • Dispensing with a precise gas blend will deliver the "Brewery Fresh Taste" in each and every glass – consistent quality improves customer satisfaction! • Reduce pour cost by eliminating waste as carbonation levels are maintained for the variety of draft beers on tap – a more reliable dispense process reduces the chances of overpours.
GLYCOL COOLED BEER DISPENSE SYSTEMS GAS BLENDERS MICRO MATIC PRO-LINE™ Outlet pressure is preset at 47 psi to eliminate operator tampering and minimize unnecessary service calls. PART NO.
GLYCOL COOLED BEER DISPENSE SYSTEMS PRO-MAX™ REGULATOR PANEL KITS INTEGRATED PRO-MAX™ KITS Includes Profit Maximizer™ and pre-plumbed to drain. All stainless steel contact components. PART NO. 10" DESCRIPTION PANEL SIZE SS NIPPLE RPK-1-PM 1 pressure / 1 product 4 1/4"W x 10"H 3/8" I.D. RPK-2-PM 2 pressure / 2 products 10"W x 10"H 3/8" I.D. RPK-4-PM 4 pressure / 4 products 21 1/2"W x 10"H 3/8" I.D. 550XFM96WHC Replacement jumper line – 8' x 3/8" I.D.
GLYCOL COOLED BEER DISPENSE SYSTEMS BEER PUMPS • Designed for long draw systems • Maintain internal keg pressure with CO2 at brewery recommendation PART NO.
FLOW RESTRICTORS CONSISTENT FLOW RESTRICTING RIGHT AT THE TOWER SAVE UNDERBAR SPACE Have you wrapped 3' or more of 3⁄16" vinyl restriction line and tried to find a place for it under the bar? NO VINYL HOSE – USE ALL BARRIERMASTER FLAVOURLOCK The integrity of our trunkline is based on the quality of our BarrierMaster Flavourlock Tubing; enhanced performance and longevity by utilizing all BarrierMaster FlavourlockTubing. CALCULATE THE PERFECT AMOUNT OF RESTRICTION Do the math.
GLYCOL COOLED BEER DISPENSE SYSTEMS GLYCOL SYSTEM INSTALLATION KITS TRUNKLINE I.D. 1/4" 1/4" 5/16" 5/16" 3/8" 3/8" KIT PART NUMBER IK-4 IK-4A IK-5 IK-5A IK-3 IK-3A PART NO.
LEAK DETECTORS BYPASS LEAK DETECTOR Leaks can occur 24 hours a day / seven days a week. Even a small leak of one-half cubic foot an hour wastes more gas each day than you would use to dispense two kegs of beer. The Bypass leak detector shows you in seconds if you have a leak. As leaks are repaired, it serves as your scorecard, letting you know how much of the problem is resolved and if all leaks are fixed. PART NO.
LEAK DETECTORS CO2 SAFETY SIMPLIFIED Standards around the world mandate that employees and customers are not exposed to potentially dangerous levels of carbon dioxide (CO2) as it is a highly toxic gas even in small quantities. When an Analox instrument detects potentially dangerous levels of carbon dioxide in the air, it triggers an audible alarm and visual indicator at the walk-in cooler entrance. Analox uses and infrared detector system with state-of-the-art monitoring technology.
DISPENSE SYSTEMS AIR COOLED INSIDE VIEW WALL MOUNTED DIRECT DRAW DISPENSING THROUGH A WALL A walk-in cooler stores both the kegs and the beer lines for delivery of product to shanks mounted directly through a wall. A drip tray mounts to the outside wall to contain any spillage. Beer is dispensed at the same temperature as it is stored in the walk-in. PERFORMANCE TIP: THE WALK-IN SHOULD BE DEDICATED TO KEG BEER, WITH A MINIMUM AMOUNT OF WALK-IN TRAFFIC IN ORDER TO MAINTAIN KEG TEMPERATURE.
OUTSIDE VIEW WALL MOUNTED DIRECT DRAW DISPENSING THROUGH A WALL Straightforward dispensing: shanks and faucets are mounted through drip tray directly into walk-in. WALL MOUNT DRIP TRAY DRAIN PIPE Connects to wall mounted drip tray allowing beer disposal. FLOOR DRAIN Drains beer from wall mounted drip tray. FAUCETS Dispenses beer. Available in stainless steel, chrome-plated, gold-plated and polished brass. SHANKS Connects to faucet and beer line allowing beer to be dispensed through walk-in cooler wall.
AIR COOLED BEER DISPENSE SYSTEMS BLOWERS COMPLETE BLOWER ASSEMBLY 1651 ES-12-1A ES-60-2A PART NO. CFM WITH VINYL ADAPTER LENGTH OF RUN ES-12-1A 12 Fits 1" blower hose 5 ft max ES-29-2A 29 Fits 1" blower hose 10 ft max ES-60-2A 51 Fits 2" flex tubing 15 ft max ES-140-3A 131 Fits 3" flex tubing 20 ft max ES-265-3A 273 Fits 4" flex tubing 25 ft max AIR SHAFTS & INSULATION ES-140-3A 12 & 29 CFM BLOWER HOSE PART NO.
AIR COOLED BEER DISPENSE SYSTEMS 133 BLOWER FITTINGS & ACCESSORIES PART NO.
PRO-LINE MICRO MATIC DESIGNED BY BEER-INDUSTRY EXPERTS FOR PERFORMANCE AND VALUE! ™ E-SERIES FUNCTIONAL FEATURES • Space-saving side mounted evaporator maximizes interior space. • Front-mounted controls for power, thermostat and lighting. : • Balanced refrigeration designed to operate on adjustable thermostat. • Digital thermostat for precise temperature management. • Double stainless steel floor, reinforced door frame at bottom. ENGINEERED FOR PERFORMANCE • Front breathing for cooling & exhaust.
KEG FOOTPRINTS NEW 1/6 9 1/4" 11 1/8" 16 1/8" 16 1/8" 1/6 BARREL 1/4 SLIM BARREL 1/4 BARREL 1/2 BARREL 1/6 1/2 1/4 SLIM 1/4 1/4 SLIM 1/2 1/2 1/6 1/6 1/6 1/6 1/6 1/2 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/2 1/4 SLIM 1/4 SLIM 1/2 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/2 1/6 1/6 1/6 1/6 1/6 1/6 1/4 SLIM 1/4 SLIM 1/6 1/4 SLIM 1/6 1/6 1/4 SLIM 1/4 SLIM 1/6 1/6 1/2 1/4 SLIM 1/4 SLIM 1/4 SLIM 1/6 1/6 1/6 1/6 1/6 1/6 1/
GOT LIMITED FLOOR SPACE? THAT’S WHERE SLIM17 FITS IN 32% FOOTPRINT REDUCTION SLIM17 17” WIDTH | 136 25” WIDTH
SIZE & VERSATILITY IN ONE Measuring under 18” wide, the SLIM17 is the is slimmest commercial kegerator on the market capable of dispensing up to two 1/6th kegs of beer, wine, coffee or kombucha.
REFRIGERATION PRO-LINE™ E-SERIES DIRECT DRAW FEATURES: • Balanced refrigeration system designed to operate at 36 – 38˚ F. • Space-saving side mounted evaporator optimizes interior cabinet space. • Ozone-friendly refrigerant. • Digital, adjustable thermostat (most models). • Choice of durable black vinyl or stainless steel exterior. MDD23-E Rinser model available MODEL KEGS FAUCETS DRIP TRAY WIDTH CRATED WEIGHT • I ndustry‘s first integrated glass rinser.
REFRIGERATION PRO-LINE™ E-SERIES DIRECT DRAW CHOOSE A KEGERATOR 1 2 3 3 4 6 6 8 8 8 D4743T D4743DT DS-133-PSS D7743PSS D7744PSS DPT36PSS-PL DPT36PSS-PL-304 DPT38PSS-PL DPT37PSS-PL-304 CP-U-8 PRE-DRILLED TOWER MOUNT(S) PART NO.
TAPPING INTO NEW PRODUCTS & PROFITS BEVERAGE STATION ™ The Beverage Station™ is a two-zone refrigeration unit that allows the operator to offer a vast array of beverages at the ideal temperature all from a single, MOBILE unit. Wheel it into place, plug it in and start pouring.
CHOICE IS WHAT'S ON TAP. CHOICE FOR THE CUSTOMER. CHOICE FOR THE OPERATOR.
GRAB DRAFT. GROWLER FILLER FRESH TO GO. At Pizzeria – Take home hot baked pizza and fresh from the tap beer. At C-Store – Instead of grabbing bottles or cans, beer fresh from the tap. At Market – One stop, pick up prepared fresh foods and fresh tap beer. At Breweries – Fill growlers with fresh keg beer instead of filling bottles or cans.
THE MICRO MATIC GROWLER FILLER PUTS TECHNOLOGY TO WORK: – Fill from your choice of up to four kegs. – Place the empty growler on the pad, close the cover and press the prompts on the touchscreen pad. Simple touchscreen control. – Bottle raises and automated counter pressure takes over to purge the bottle. – Beer gently fills down the inside wall of growler with no turbulence. – Filling is completed, growler lowers to start position. – Open the cover and cap growler. PART NO.
REFRIGERATION PRO-LINE™ E-SERIES BACK BARS FEATURES: • Refrigeration system is a free-flowing air system to ensure "ice cold" products at all times. • Heavy-duty 18-gauge stainless steel top with raised glass rails creating a convenient storage area. • Black finish models: wear-resistant black vinyl front and sides. MBB36-E MBB36-E MBB94S-E Stainless steel finish models: stainless front and sides. Slide-out compressor for easy cleaning & maintenance. Environmentally-friendly CFC-free refrigerant.
REFRIGERATION PRO-LINE™ ACCESSORIES PART NO.
REFRIGERATION PRO-LINE™ E-SERIES WINE FEATURES: • E-Series. • Adjustable, dual-temperature zones. – Whites 45˚ F – Reds 55˚ F • Color-coded digital thermostat for each zone. • Rear knock-out plugs for gas lines. • • • • • Black vinyl exterior. Stainless steel exterior available. Heavy-duty stainless steel top. Pre-cut holes for towers with bolt holes. Door with key lock. Reinforced stainless steel interior floor. 4-KEG DISPENSER – MOBILE. INCLUDES HEAVY-DUTY CASTERS. Holds up to 4 – 20 L kegs.
REFRIGERATION PRO-LINE™ E-SERIES WINE FEATURES: • E-Series. • Adjustable, dual-temperature zones. – Whites 45˚ F – Reds 55˚ F • Color-coded digital thermostat for each zone. • Rear knock-out plugs for gas lines. • • • • • Black vinyl exterior. Stainless steel exterior available. Heavy-duty stainless steel top. Pre-cut holes for towers with bolt holes. Door with key lock. Reinforced stainless steel interior floor. 8-KEG DISPENSER Holds up to 8 – 20 L kegs. Order tapping kit separately.
REFRIGERATION HOSHIZAKI ICE MAKERS Increase profit! Hoshizaki crescent ice cubes have excellent liquid displacement because of their unique shape. Better displacement can result in higher profits. No splashing! The uniquely-shaped crescent ice cube allows liquid to flow over it more easily, whether pouring from bottles or dispensers. Reduce waste from splashing. Crescent ice cubes FEATURES: • Exclusive stainless steel evaporator.
REFRIGERATION MERCHANDISERS FEATURES: • Glass door merchandisers designed with unmatched quality and durability. • No-chip exterior with durable black vinyl finish, also available in white. • Easy-to-clean NSF approved white coated steel interior with stainless steel floor. • Electronic controller maintains set temperature throughout the interior. • LED interior lighting provides "Low-E" energy consumption with excellent shadow-free illumination.
SERVICE. VALUE. CUSTOMS. PRO-LINE WALK-IN COOLERS ™ For over 30 years our coolers have been leading the industry with the most reliable walk-ins for the everyday foodservice and retail business because of our quality construction, the most efficient insulation, the highest quality cooling units, expedited customer service and the longest running warranties in the industry.
THE MOST RELIABLE, WELL CONSTRUCTED WALK-IN COOLERS FOR EVERYDAY BUSINESSES. SERVICE Our commitment to customer service starts with understanding the customer’s expectations. From the quote to engineering to delivery and arranging installation, it’s all about meeting expectations. VALUE We use only the best U.L. Class 1 Non-CFC Extruded Polystyrene Insulation. Our Extruded Polystyrene Insulation bonds with the panels to provide strength and durability.
PORTABLE DISPENSERS JOCKEY BOX COOLERS 304 STAINLESS STEEL CONTACT COIL COOLERS Brewers demand the best when dispensing their craft. The purity and durability of 304 stainless steel is now available in a portable jockey box. Every component that touches the beer is made with 304 stainless steel: inlet shank, coil, outlet shank and faucet. Includes faucets, shanks and ice box coupler assemblies. Faucet knobs included. NUMBER OF PRODUCTS PART NO. CB481R-304 COIL LENGTH COIL I.D.
PORTABLE DISPENSERS JOCKEY BOX COOLERS COLD PLATE COOLERS Includes jumper lines, faucets, shanks and beer line assemblies. Faucet knobs included. NUMBER OF PRODUCTS PART NO. COLD PLATE SIZE COOLER SIZE COLOR HDCP-D1-48B 1 10" x 15" 48 qt Blue HDCP-D1-48R 1 10" x 15" 48 qt Red HDCP-D2-48B 2 10" x 15" 48 qt Blue HDCP-D2-48R 2 10" x 15" 48 qt Red NOTE: Rack included on all cold plate coolers. A cold plate should never sit in water.
PORTABLE DISPENSERS COMPONENTS & ACCESSORIES ALUMINUM COLD PLATES WITHOUT FITTINGS Inlet and outlet fittings need to be ordered to complete cold plate. Please specify when ordering. PART NO.
TEMPORARY DISPENSING FLASH CHILLER FEATURES: • Great for pasteurized imports in limited refrigeration situations. • Use at special events to dispense any beer ice cold. • Uses 30' of coil submerged in a 20 lb ice bank. • Double loop coil for additional cooling of 1 keg. PART NO. DESCRIPTION FC-8000 Flash chiller • • • • • Compact size fits on under-counter shelf. Plugs into standard outlet. Space requirement: 27"W x 16"H x 16"D Dispense 2 kegs. 1/5 HP compressor.
PARTY PUMPS iPUMP ™ The basic bargain! The lowest priced pump. 3167 PART NO. DESCRIPTION 3167 Plastic base and pump SYSTEM D LEGEND A price that is hard to beat! The Micro Matic Legend picnic pump will outperform and outlast any similar party pump on the market. FEATURES: • Forged brass body for durability. • Available in chrome-plated or gold-plated body for brand identification. • 3 pump choices. BEST SELLER 7509E 7509E-G 4" LEGEND PARTY PUMP 7520E PART NO.
PARTY PUMPS IMPORT 4" IMPORT PICNIC PUMP PART NO. DESCRIPTION SYSTEM PUMP 751-033 751-057 Guinness / Harp U HP-700 Anchor Steam / Boddington G HP-700 751-059 Warsteiner / Spaten / Paulaner A HP-700 751-061 Schneider / Aventinus / Einbecker M HP-700 SUPREME 751-033 PART NO.
PARTY PUMPS PARTY PUMP CLEANING COMPLETE KITS PART NO. MM-B68 M5-801147 See page 39 for cleaning solution Re-lube probe and body o-rings after cleaning for optimum performance DESCRIPTION SYSTEM M5-801147 5 L bottle, cap and dip tube D M5-808033 5 L bottle, cap and dip tube S M5-808041 5 L bottle, cap and dip tube U M5-808053 5 L bottle, cap and dip tube A M5-808051 5 L bottle, cap and dip tube G EASY PARTY PUMP CLEANING PROCEDURES 1. Remove cleaning bottle cap.
PARTY PUMPS REPLACEMENT PARTS PUMPS PART NO. DESCRIPTION HP-300 3" low profile plastic pump with plastic piston HP-700 4" chrome pump with chrome plated brass piston HP-900 8" chrome pump with chrome plated brass piston HP-100 8" plastic pump with stainless steel piston PARTS FOR HP-100 PART NO.
WINE FONTS SOMMELIER Choices. That’s what this Sommelier offers. Wine certified and compact in space, it features up to four side pull faucets. The 4" diameter column is highlighted by stamped beading. The Sommelier font is solid stainless steel polished to a mirror-like finish – it will keep its shine for years of dispensing wine on tap. NSF certified. MTM-3PSS-W PART NO.
WINE FONTS EDGE The Edge tower draws its name from the crisp lines defining it’s shape. Featuring polished stainless steel exterior that creates mirror-like surfaces. Our 304 Series stainless steel faucets are standard. See available options (pg. 91). PART NO.
WINE CERTIFIED EQUIPMENT KEG COUPLER PART NO. 7485BS 7485SS DESCRIPTION 7485BS 304 stainless steel probe with chrome-plated brass body 7485SS 304 stainless steel probe and body GAS REGULATORS PART NO. 842N-15 842-15 DESCRIPTION 842-15 Economy double gauge C02 regulator with 15 psi gauge 842N-15 Economy double gauge N regulator with 15 psi gauge 8011-15 Economy secondary regulator, 1 pressure up to 15 psi product FAUCETS PART NO.
WINE CERTIFIED EQUIPMENT FITTINGS & ACCESORIES PART NO. 526BS-304 DESCRIPTION 543BS 304 stainless steel wall bracket, 3/8" bore 526BS-304 304 stainless steel hose nipple, fits 1/4" poly tubing BE-212-3-304 304 stainless steel elbow hose nipple, fits 1/4" poly tubing SSS-B2 304 stainless steel hose splicer, fits 1/4" poly tubing SST-B2 304 stainless steel tee, fits 1/4" I.D. poly tubing WD-023 Plastic tee, 1/4" I.D. hose WD-020 1/4" O.D.
COCKTAILS ON TAP BEVERAGE TANK™ LIKE TAPPING A KEG The Beverage Tank™ is a robust stainless steel vessel with an integrated valve. The large opening makes it easy to clean and fill the tank. Use a keg coupler to pressurize the tank and then to dispense the contents. Use a Beverage Tank™ for still beverages or combine with a SpinStick™ mixer base for continuous blending. DH1501 B-18-2 PART NO.
POUR YOUR OWN SELF-SERVE DRAFT SYSTEMS Beer and Wine Systems where the customer can choose and pour their own beverage are becoming extremely popular. Call for details 866-327-4159 Micro Matic is proud to partner with two Best-in-Class companies, iPourIt and PourMyBeer, who specialize in the technology that allows consumers to pour their own beer and wine. The consumer has the freedom to pour as little or as much as they wish and they pay by the ounce.
LIQUOR MANAGEMENT SYSTEMS INTEGRATED BAR SOLUTIONS Realize True Profits with Berg – Complete liquor control, monitoring, management and reporting – Make data-based decisions, control costs and improve profitability! – Fast ROI! Realize savings in as little as 4 weeks – Inventory control with purchases reduced by 25-40% – 10-20% increase in gross sales due to accounting for all drinks 1 IN 5 DRINKS NEVER MAKE IT TO THE REGISTER! The Industry Leader – For over 40 years, the most respected and advanced liquo
BERG MERLIN WIRELESS SYSTEMS Technology that fits all venues seamlessly – Unique Bartender ID linked via touch screen wrist “watch” to POS/ECR – Perfect cocktails poured with up to 5 liquors per recipe every time – Single PLU to POS/ECR for multiple liquor cocktails – RF communication bandwidths adjustable to harsh electronic environments – Exclusive software for reporting, price level and portions changes, custom events Affordable cash and cost control by brand ID.
WATER ON TAP ON-DEMAND FRESH, FILTERED & CHILLED "TAP" WATER READY IMMEDIATELY, NO NEED TO STORE AND CARRY INVENTORY.
WATER DISPENSE SYSTEMS WATER SYSTEM KITS On-demand fresh, filtered, chilled "tap" water. Consider the savings and sustainability versus bottled water. Ready immediately, no need to store and carry inventory. QUALITY AND PURITY • Start with available tap water, then microfilter and purify, leaving the water better tasting and balanced with natural mineral salts. • No prolonged exposure to plastic, which may leach harmful chemicals when exposed to high temperatures or sunlight.
COFFEE EQUIPMENT AMERICANO The Americano model mobility makes it versatile for use in either a semi-permanent install behind the bar or wheel to the patio or special events. Americano is a self-contained refrigerator and dispenser for consistent nitro cold brew coffee. Use with ready-to-drink kegs or brew your own and store it in a Beverage Tank™ or Corny keg. PART NO.
COFFEE EQUIPMENT COMPONENTS PART NO.
SYSTEM DESIGN & PROJECT MANAGEMENT NORTHEAST Neil Cahill Regional Sales Manager Alex Maisel Michele Ingham Kristine LaScala National Accounts Ops Manager Pat Rafter Business Development Manager Dispense System Design Coordinator Doug Wetmore Area Sales Representative Project Coordinator Ed Wigley Area Sales Representative 50 LITER CENTRAL Trey Wiegand Director of National Accounts & Foodservice President Technical Development Manager Jack Thompson Sean Fadden Cian Hickey Chairman U.S.
KEG VALVE SYSTEMS ORDERING INFORMATION BEERS Bass Ale Budweiser MOST DELIVERIES WITHIN 2 DAYS! D 7485BS S NORTHEAST SALES 4601 Saucon Creek Rd Center Valley, PA 18034 (610) 625-4464 (610) 625-4466 (Fax) A 7486SS SOUTHEAST SALES 15111 Dispense Ln Brooksville, FL 34604 (352) 799-6331 (352) 796-2429 (Fax) HOURS Monday through Friday 8:00 AM to 4:30 PM ORDERING • • Phone orders at (866) 327-4159 can be placed during regular business hours. Online orders at micromatic.
MICRO MATIC LIMITED WARRANTY (Does not apply to Micro Matic Brand Refrigeration Units, which are covered under the Micro Matic Brand Refrigeration Units Limited Warranty.) WHAT DOES THIS WARRANTY COVER? Micro Matic USA, Inc. (“Micro Matic”) warrants that its products will be free from defects in material and workmanship, under normal use and regular service, and preventative maintenance for the Warranty Period (defined below).
INDEX A Adapters, Tower ............................ 96 Air (Gas) Distributors ..................... 23 Air Cooled Systems........................ 130-133 Anaconda Tower ............................ 88 Analox CO2 Leak Detectors .......... 129 B Back Bars........................................ 144 Bag-in-Box Systems ....................... 163 Barrier Tubing ................................. 24 BeerBlast®....................................... 121 BeerCheck ......................................
TRAINING FOR THE DRAFT PROFESSIONAL DISPENSE INSTITUTE As a major supplier of keg dispensing equipment in over 120 countries worldwide, Micro Matic is committed to the delivery of quality draft beer. This commitment has led to the development of the Micro Matic Dispense Institute Learning and Training Center to improve draft beer knowledge and technical skills. 3 options to increase dispensing knowledge: 1 ONLINE DISPENSE INSTITUTE 24/7 TRAINING ACCESS AD 24/7 access at micromatic.
CLASSROOM INSTRUCTION HANDS-ON TECHNICAL TRAINING DISPENSE INSTITUTE AD CERTIFIED RESULTS 3 ADVANCED 3 DAYS COURSE TRAINING Keep your competitive edge with 3 days of hands-on training. MAKE YOUR RESERVATION TODAY! Advanced Course Dates 2019 Includes: Training Manual, Supplies and Meals TUITION: $595.
NOTES | 178
NOTES MICROMATIC.
N TRO COFFEE & TEA SERVED RIGHT. EVERY TIME. WE STAY AWAKE SO YOU CAN SLEEP ON TAP BREATHE EASIER, THEY WON’T BE CALLING YOU EVERYTHING Customers want choice today. As the industry leader in ON TAP solutions, we understand the importance of delivering reliable, high-quality yet cost-effective Q U A L On I TTap Y including WITHOUT dispensing solutions for Everything beer, wine, cocktails, coffee, teas or any beverage in various formats (Keg, BiB, Pre-Mix, Post-Mix)...
