Specification Sheet

MICRO MATIC PRO-LINE™
Outlet pressure is preset at 47 psi to eliminate operator tampering and minimize unnecessary service calls.
PART NO. BLEND
LEAK
DETECTOR
FLOW
RATE
KEGS /
HR ALE AND LAGER
BLENDS*
ALE AND LAGER STOUT
MM100 Single Standard 10 70% CO
2
& 30% N*
MM100-LD Single Included Standard 10 70% CO
2
& 30% N*
MM100-60-40 Single Standard 10 60% CO
2
& 40% N
MM100-60-40-LD Single Included Standard 10 60% CO
2
& 40% N
MM100S Single Standard 10 25% CO
2
& 75% N*
MM200 Double Standard 20
^
70% CO
2
& 30% N* 25% CO
2
& 75% N*
MM200-LD Double Included Standard 20
^
70% CO
2
& 30% N* 25% CO
2
& 75% N*
MM200-60-40 Double Standard 20
^
60% CO
2
& 40% N 25% CO
2
& 75% N
MM200-60-40-LD Double Included Standard 20
^
60% CO
2
& 40% N 25% CO
2
& 75% N
MM300 Triple Standard 30
^
70% CO
2
& 30% N* 60% CO
2
& 40% N 25% CO
2
& 75% N*
*Micro Matic Pro-Line™ gas blenders meet blend standards established by major breweries and the Brewers Association. ^Up to 10 kegs per hour per blend.
TRUMIX
®
Inlet pressure can be adjusted from 55 – 150 psi. Includes gauge(s) to adjust outlet pressure from 0 – 47 psi. If you need a custom gas
blend, all Trumix
®
blenders are available in any blend from 5 – 95% CO
2
.
PART NO. BLEND
LEAK
DETECTOR
FLOW
RATE
KEGS /
HR ALE AND LAGER
BLENDS*
ALE AND LAGER STOUT
TM100-60-40 Single Standard 10 60% CO
2
& 40% N
TM100-70-30 Single Standard 10 70% CO
2
& 30% N
TM100HF Single Standard 20
^^
Specify Gas Blend: from 5 – 95% CO
2
Balance N
TM200-60-40 Double Standard 20
^
60% CO
2
& 40% N 25% CO
2
& 75% N
TM200-70-30 Double Standard 20
^
70% CO
2
& 30% N 25% CO
2
& 75% N
TM200HF Double High-Flow 40
^^
Specify Gas Blend: from 5-95% CO
2
Balance N
^Up to 10 kegs per hour per blend. ^^Up to 20 kegs per hour per blend.
HIGH PRESSURE REGULATORS
Recommended use with Pro-Line™ and Trumix
®
gas blenders. Use with braided high pressure hose.
PART NO. DESCRIPTION
642HP Premium high pressure regulator double gauge CO
2
– 110 psi safety release
942B High pressure regulator double gauge CO
2
– 120 psi safety release
942BN High pressure regulator double gauge nitrogen – 120 psi safety release
IN-LINE CHECK VALVE TEES
Protect the gas blender from being lled with water when used in conjunction with bulk CO
2
or a soda carbonator. Use with braided high
pressure hose. The Pro-Line™ and Trumix
®
gas blender warranty only covers against water damage if a tee was installed.
PART NO. THRU OUTLET
MV013 1/4" x 1/4" 1/4"
MV042 3/8" x 3/8" 3/8"
MV044 1/4" x 3/8" 1/4"
HIGH PRESSURE HOSES
PART NO. COLOR I.D. O.D. CLAMP LENGTH
548WD1200C Clear 1/4" 1/2" BE-1314 100'
549WD1200C Clear 5/16" 9/16" BE-1316 100'
550WD1200C Clear 3/8" 5/8" BE-1317 100'
MM100-LD
MM100
TM100-70-30
(11" x 15" x 6")
642HP
MV044
MV013
Braided vinyl tubing
(7 3/4" x 8 3/4" x 4 1/2")
GAS BLENDERS
BLENDER ACCESSORIES
NEW
GLYCOL COOLED
BEER DISPENSE SYSTEMS
| 123MICROMATIC.COM