Specification Sheet

:
AIR COOLED
DISPENSE SYSTEMS
WALL MOUNTED DIRECT DRAW DISPENSING THROUGH A WALL
A walk-in cooler stores both the kegs and the beer lines for delivery of product to shanks
mounted directly through a wall. A drip tray mounts to the outside wall to contain any
spillage. Beer is dispensed at the same temperature as it is stored in the walk-in.

WITH A MINIMUM AMOUNT OF WALK-IN TRAFFIC IN ORDER TO MAINTAIN
KEG TEMPERATURE.
INSIDE
VIEW
IN-PLACE CLEANING SYSTEM

your own lines when a keg empties.
SHANKS
Connects to faucet and beer line
allowing beer to be dispensed
through walk-in cooler wall.
EVAPORATOR UNIT
Creates refrigerated air for walk-in cooler.
50 LITER CLEANING BOTTLE

and one contains rinse water for the
"In-Place Cleaning System" .
COUPLER
Dispense head for
tapping kegs.
KEG STACKER
Saves space while allowing two
kegs in series to be tapped.
BEER HOSE
Transfer source for beer.
KEGS
Contains beer
under pressure.
CO
2
CYLINDER

2
.
CO
2
REGULATOR

2
from the cylinder.
GAS LINE
Transfer source
for blended gas.
SECONDARY REGULATORS
Regulates gas pressure to each

| 130