Specification Sheet

Job Number:_____________________________________________ Location: ________________________________________________________________________

• Add European style while creating dispense excitement

• Condition the glass before pouring – invert glass, push down on sprayer

for cold water rinsing

• Robust 18 gauge stainless steel construction

• Welded corners, nished smooth for safety and appearance

www.micromatic.com • 1

(

866

)

327-4159

SURFACE MOUNT SERIES 5" X 20"

DRIP TRAY

5" WIDTH TRAY WITH GLASS RINSER

NSF Certied

(Rinser Only)

DP-120D-20GR

Brushed Stainless Steel

PAGE 1
DRIP TRAY SURFACE MOUNT SERIES 5" X 20" • Add European style while creating dispense excitement • Condition the glass before pouring – invert glass, push down on sprayer for cold water rinsing • Robust 18 gauge stainless steel construction • Welded corners, finished smooth for safety and appearance DP-120D-20GR Brushed Stainless Steel NSF Certified (Rinser Only) www.micromatic.
PAGE 2
Specifications Part No. DP-120D-20GR Micro Matic reserves the right to change specifications without notice. Dimensions Description Shipping Weight Box Dimensions 5"W x 20"L x 3/4"H Stainless Steel TBD TBD Rinser Water Inlet Installation • Always check local plumbing codes first. • Install in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure).