Use and Care
10
// www.micromatic.com
4.2 DESCRIPTION OF BUTTONS ON MODELS WITH DIGITAL CONTROLLER
The Pro-Line
™
dispenser is designed to maintain keg temperature within the most
desirable range of 36° to 38°F. You can expect the Pro-Line
™
unit to maintain
temperature with the proper temperature control setting and in a normal environment.
If a different setting is desired, follow these
instructions to adjust the thermostat.
Symbol Mode Operation
On Compressor enabled
Flashing Anti short cycle delay enabled (AC parameter)
On Defrost in progress
Flashing Dripping in progress
On Measurement unit
Flashing Programming mode
On Measurement unit
Flashing Programming mode
To display target set point,
in programming mode
it selects a parameter or
conrms an operation
To start a manual defrost
(only XR02CX)
In programming mode it
browses the parameter
codes or increases the
displayed value
In programming mode it
browses the parameter
codes or decreases the
displayed value