Use and Care

3
// www.micromatic.com
1 // RECEIVING AND INSPECTING
Upon receiving your new Micro Matic Pro-Line
™
Refrigeration E-Series
™
equipment,
check the package and the unit for any damages that may have occurred during
transportation. Visually inspect the exterior of the package. If damaged, open and
inspect the contents with the carrier. Any damage should be noted and reported on
the delivering carrier’s receipt.
In the event that the exterior is not damaged, yet upon opening, there is concealed
damage to the equipment notify the carrier immediately. Notication should be made
verbally as well as in written form. Request an inspection by the shipping company of
the damaged equipment. Retain all crating material until inspection has been made.
Finally, contact Micro Matic.
Open the compressor compartment housing and visually inspect package. Be sure
lines are secure and base is intact.
A NOTE FROM OUR QUALITY CONTROL MANAGER
Congratulations on your new purchase. We would like to welcome you to the Micro
Matic team. The unit in front of you is a great piece of equipment that will become one
of your most reliable tools in your daily operations for years to come!
Prior to shipping your unit, our trained service technicians tested your unit for a period
of 12 hours. This performance test was recorded and a copy of the results is included
with this service manual. During this test, our highly qualied personnel inspected your
machine for leaks, lose components, and improper noise levels. We also tested the
cooling performance in an effort to give you the best and most reliable unit possible.