Operation Manual

150 of 164
9.11. Using multiple programmes
The appliance can carry out multiple programmes consecutively. Up to 2
programme sequences can be programmed to run automatically.
Set each cooking programme as described and press the
button when the last
cooking programme has been set.
Example:
You want to defrost food with a defrosting programme and then subsequently start
the grill programme.
 Set the defrosting programme as described in “9.9. Defrosting according to
weight” on page 149 without subsequently pressing the button.
 Then set the grill programme as described in “9.7. Grill mode” on page 147.
 Now press the button to start the programmes.
Both programmes will now run consecutively.
9.12. Preheating/cooking with convection oven
The oven needs to be preheated for different foods. Proceed as follows to preheat
the appliance:
 Press the
button once and turn the control knob to set the
temperature.
A temperature range between 140–230°C is possible.
 Press the
button twice to confirm the selection.
An acoustic signal sounds when the preset temperature has been reached and you
can then put the food into the appliance.
 Then select the desired programme.
Proceed as described above when cooking with convection oven:
 Once you have confirmed the set temperature, turn the control knob
to set the cooking time.
 Press the
button to confirm the selection.
The cooking process begins.
9.13. Automatic cooking
In automatic cooking, it is not necessary to enter the cooking time or power output
level. The microwave automatically works out the values depending on the food
being cooked and its weight.
In the table, you can see an overview of the automatic programmes with the
readout shown on the display and the relevant operating modes used.
16573 DE FR NL EN ECommerce Content Final.indb 15016573 DE FR NL EN ECommerce Content Final.indb 150 12.08.2015 09:56:4612.08.2015 09:56:46