Instruction manual

* non contractual pictures
Dear Customer,
Thank you for purchasing one of the 3 Micromega CD players: CD-10, CD-20, CD-30. These players are mainly different by their audio characteristics. This manual is then
common for the 3 models.
This unit provides ease of use and sonics of the highest quality. Please pay close attention to this instruction manual, and read it fully before attempting to operate. It is designed
to ensure you maximise your pleasure of CD player and familiarise you with its many unique functions.
CHECKING
Check that the carton has no damage. Should you have any doubt about its condition,
please do not hesitate to contact your dealer.
UNPACKING
Very carefully remove the unit from the box, taking care to preserve all the packing
material. It is good practice to put the carton and its contents into an outer plastic bag
and deposit it somewhere safe and dry. In the unlikely event that your unit needs to be
sent back to either your dealer or distributor, it must be sent in the original packing
material. Failure to observe this will invalidate your warranty.
ACCESSORIES
Upon opening the carton you should find the following:
• Mains Lead.
• Micromega system remote control handset
• 4 batteries 1V5 / AAA
MAINS VOLTAGE
Check that the mains voltage indicated on both the carton and the bottom of the unit
correspond to the local power supply.
If you are in any doubt, consult your dealer.
INSTALLATION
In order to obtain the maximum performance of CD player, it is important to follow the
installation instructions.
Wherever possible, we recommend that the CD player is installed in an audio rack or
other suitable furniture that provides sufficient ventilation.
CONNECTIONS
Having verified that the ON/OFF switch is on OFF position, connect the mains leads
provided to the rear of the unit and to the wall socket.
Connect the interconnect cable from the rear of your player to your amplifier input.
Connect the Digital out if required.
POWER UP
You may now turn on your CD player by switching the ON/OFF switch located at the
back of the unit. A message “CD” is written for a second.
At first start-up, or when both keys NEXT and PREV are pressed simultaneously and
when power is switched on, you can choose the displaying language of your player:
Press PLAY to select French or MODE to select English. There is 5 seconds to do so, if
not English language is selected by default. Then a welcoming message appears.
The standby LED lightens up indicating that the unit is in standby mode.
Press once the CD key of the remote control or the STANDBY key of the unit.
If there is a disc, reading starts and its content is displayed.
Otherwise it indicates:
FRONT PANEL
DISC: To stop play, to clear a program in stop. Display on/off (long pressure).
PLAY: To start play and to pause during play.
PREVIOUS: Selection of the previous track and reverse search during play .To replay
the current track during play.
NEXT: Selection of the next track and forward search during play.
MODE: CD-TEXT on/off and Digital output on/off (long pressure).
STANDBY: To switch the unit in and out of Standby mode. A blue LED located in the
middle of the panel illuminates when in Standby mode.
DISPLAY
The display indicates:
• On the left side track indication.
• In the middle the status of the unit
• On the right side the time in minutes and seconds.
PLAY
Open the tray and place a disc. When the tray is closed, the player reads the disc:
And it displays its contents:
If no disc is detected, the display indicates "NO DISC".
Press PLAY to begin reading the disc. The display indicates:
:
The display indicates on the left hand the current track, play mode and elapsed time on
the right hand.
If you wish to stop playing a disc, press DISC on the unit or STOP with the remote.
STANDBY MODE
To put the player in standby mode, press STANDBY on the unit or on the remote.
If the tray is open, it will close, then the LED illuminates showing the device is in
standby mode.
TRAY SPEED
You can select the speed of the tray by pressing PLAY and PREVIOUS while powering
up the player. The display shows then: SPEED MED. To change press NEXT, MODE
or STANDBY. Confirm your choice by pressing DISC.