Instruction Manual

Logic Functions - Book 1
REMOTE DIGITAL INPUT MODULE BLOCK (RDIM)
6-14
6.3.2 Remote Digital Input Module Block Parameters
The mnemonics, valid values, and data types for all attributes that can be selected for display
and/or be used in making softwiring connections are listed in Table 6-2. A description of each
attribute is provided in the attribute list that follows the table.
Table 6-2. RDIM Block Attributes, Valid Values, Mnemonics, and Data Types
Field Name / Attribute Mnemonic Valid Values CWR Data Type Attr
Version VERSION 1 – – R Long State 00
Block Length BLKLEN No. of database bytes used – – R Count 01
State STATE RUN (0) – – R Short State 02
Bad Inputs Accepted BADINP YES (1) – – R Discrete 03
Diagnostic Group
SUPPGRP NONE, 1, 2, 3, 4, 5, 6 or 7 CWR Long State 04
I/O Mismatch
MODMMS ENABLE(0), SUPPRESS(1) CWR Discrete 05
Unacked I/O Mismatch MODMMU NO(0), YES(1) – WR Discrete 06
Active I/O Mismatch MODMMA NO(0), YES(1) – WR Discrete 07
(Remote) Module Error
EXTERRS ENABLE(0), SUPPRESS(1) CWR Discrete 08
Unacknowledged Remote
Module Error
EXTERRU NO(0), YES(1) – WR Discrete 09
Active Remote Module Error EXTERRA NO(0), YES(1) – WR Discrete 10
I/O Module Mismatch MODMM NO(0), YES(1) – – R Discrete 11
Slot number SLOT 1 to 32 C – R Long State 12
Remote I/O Bus Address
BUSADDR 1 to 31 C – R Long State 13
Channel INUSE 0 to 15 C – R Count 14
Extended Error : Channel 0 to
Channel 15
EXTERR0
to
EXTERR15
0 No Error
Internal error in remote unit
Cut wire (open circuit)
Overload
Overload + open circuit
Short circuit
Short Circuit+open circuit
Overload + short circuit
Short circuit + overload + open
circuit
Remote unit not present
No remote I/O present
– WR Long State 15
to
30
Mode: Channel 0 to
Channel 15
MODE0
to
MODE15
MANUAL(0), AUTO(1) CWR Discrete 31
to
46
Packed Result
PKDR FALSE(0), TRUE(1) C WR Count 60
Packed Result Quality PKDRQ GOOD(0), BAD(1) – WR Count 61