Instruction Manual

Logic Functions - Book 1
SYSTEM EVENT BLOCK
3-36
16
Report Diagnostic Event: Diag goes clear while unacked (RDGCWU)..................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event goes clear while it is still
unacknowledged to the system event queue.
NO 0 No reports are made.
17
Report Diagnostic Event: Goes clear while acked (RDGCWA) ..............................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event goes clear while it is
acknowledged to the system event queue.
NO 0 No reports are made.
18
Report Diagnostic Event: Cleared by suppression (RDGCBYS)............................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event goes clear by any method of
suppression to the system event queue.
NO 0 No reports are made.
19
Report Diagnostic Event: Acknowledged (RDGACK)..............................................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event is acknowledged by a single
acknowledge message to the system event queue.
NO 0 No reports are made.
20
Report Diagnostic Event: Globally acknowledged (RDGGLACK) ..........................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event is globally acknowledged to the
system event queue.
NO 0 No reports are made.
21
Report Diagnostic Event: Acked by suppression (RDGABYS) ..............................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event is acknowledged by any method
of suppression to the system event queue.
NO 0 No reports are made.
22
Report Diagnostic Event: Suppressed (RDGSUP)...................................................CWR
Used to enable the reporting of the event.
YES 1 Report when a diagnostic event suppression attribute is set to
YES to the system event queue.
NO 0 No reports are made.