Instruction Manual

Logic Functions - Book 1
SYSTEM EVENT BLOCK
3-38
30
Report Alarm Event: Acknowledged (RALACK).......................................................CWR
Used to enable the reporting of the event.
YES 1 Report when a PA or NM alarm is acknowledged by a single
acknowledge message to the system event queue.
NO 0 No reports are made.
31
Report Alarm Event: Globally acknowledged (RALGLACK) ...................................CWR
Used to enable the reporting of the event.
YES 1 Report when a PA or NM alarm is globally acknowledged to the
system event queue.
NO 0 No reports are made.
32
Report Alarm Event: Acked by suppression (RALABYS)........................................CWR
Used to enable the reporting of the event.
YES 1 Report when a PA or NM alarm is acknowledged by any method
of suppression to the system event queue.
NO 0 No reports are made.
33
Report Alarm Event: Suppressed (RALSUP)............................................................CWR
Used to enable the reporting of the event.
YES 1 Report when a PA or NM alarm’s suppression attribute is set to
YES to the system event queue.
NO 0 No reports are made.
34
Report Alarm Event: Enabled (RALENA) ..................................................................CWR
Used to enable the reporting of the event.
YES 1 Report when a PA or NM alarm’s suppression attribute is set to
NO to the system event queue.
NO 0 No reports are made.
35
Report Informational Events (RPTINF) .....................................................................CWR
Used to enable reporting of informational events associated with all blocks.
YES 1 Report informational events to the event queue.
NO 0 No reports are made.
36
Report Block ‘State’ Changes (RPTSTA) ..................................................................CWR
Used to enable reporting of state changes associated with all blocks.
YES 1 Report block state transition to the event queue.
NO 0 No reports are made.