User's Guide

Smart Machine Smart Decision
VL3000 Manager Tool User Guide_V1.05 15 2012.05.08
 
4.7 Set the Parameters of Fixed Report Information
 
Step_1: Select “Fixed Report Information” option.
Step_2: Select “Mode”.
0: disable Fixed Report Function.
1: enable Fixed Report Function.
Step_3: Select “Discard no fix”.
0 to report last known GPS position if there is no GPS fix;
1 to send nothing if there is no GPS fix.
Step_4: Set a group of parameters:
 Set “Begin Time” and “End Time”. The start time and end time of scheduled fixed
report. It is noticed to use UTC time here.
 Set “Check Interval 1”. The time interval to fix GPS when the terminal is in motion
state. 0 means no check. Default value is 120 seconds.
 Set “Send Interval 1”. The period to send the position information when the terminal
is in motion state. 0 means not to send. Default value is 360 seconds.
 Set “Check Interval 2”. The time interval to fix GPS when the terminal is in
motionless state. 0 means no check. Default value is 120 seconds.
 Set “Send Interval 2”. The period to send the position information when the terminal
is in motionless state. 0 means not to send. Default value is 360 seconds.
 Select “Movement Detect Mode”.
0: disable (default)
Step_1
Step_2
Step_4
Step_5
Step_6
Step_3