User Manual

7
4 Trouble shooting and Safety info
4.1 Trouble shooting
4.2 Safety info
The following items are suggestion for safety use, please pay more attention.
 Please do not disassemble the device by yourself.
 Please do not put the device on the overheating or too humid place, avoid
exposure to direct sunlight. Too high temperature will damage the device or
even cause the battery explosion.
 Please do not use
LifeGait Motion Sensors on the airplane or near medical
equipment.
FCC Caution.
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the
condition that this device does not cause harmful interference.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
Trouble Possible Reason Solution
Unable to power
off
LifeGait
Motion Sensors
.
On/off Switch is
damage
The device will power off when push
the On/off Switch to the left side
Battery can not be
charged
The battery has not
been used for too long
time and has been
locked.
Using a external power source with
3.6V to 4.2V DC power supply to
active the battery or apply for after
sale help.