User's Manual

 Charging will last about 5 hours.

Note: If the Prime One device is firstly used, please make sure the battery is fully charged,

which will make the life of battery much longer.

3.3 Prime One Data Cable

Prime One Data Cable is a cable with a Micro USB connector.

The USB data cable is used for data download, which will be used for firmware update

or configuration and can be used for charging at the same time.

Figure 2-1

3.4 Power on/Power off

Figure 2-2

Power on:

 Press the Power key at least 3 seconds and release it to power on Prime One device.

Note that, the

Power LED light will fast flash.

Power off:

 Press the power key about 3 seconds; Power LED light will fast flash and then turn

off, which indicates that Prime One device has been powered off.

Note: the user can not power off Prime One if the power key is disabled by