User Manual

6
charged, which will make the life of battery much longer .
3.3 911 Responder Data Cable
911 Responder Data Cable is a cable with a Micro USB connector.
The USB data cable is used for data download, which will be used for firmware update
or configuration and can be used for charging at the same time.
Figure 2-1
3.4 Power on/Power off
Figure 2-2
Power on:
 Press the SOS key at least 3 seconds and release it to power on 911 Responder.
Note that, the LOW BATERRY LED and SOS LED light will be solid about 10
seconds.
Power off:
 5 minutes after the call, the LOW BATTERY LED light will be solid and then turn
off, this indicates the 911 Responder has been powered off..