User's Manual

6
3.2 Battery Charging
The following items are suggestion for battery charge, please pay more attention.
 Please connect AC-DC power adapter with Prime One X device.
 Insert the AC-DC power adapter into the power socket.
 During the charging process, the Power LED light will solid. When the battery is
fully charged, the Power LED light will be Ever-light.
 You can also charge the battery using charging cable which connects Prime One X
device with the Adapter.
 Charging will last about 5 hours.
Note: If the Prine One X device is firstly used, please make sure the battery is fully charged,
which will make the life of battery much longer.
3.3 Prime One X Data Cable
Prime One X Data Cable is a cable with a 12PIN connector.
The data cable is used for data download, which will be used for firmware update or
configuration and can be used for charging at the same time (by RD or engineer not by
end user).
Figure 3-1
3.4 Power on/Power off
Figure 3-2
Power on:
 Press the Power Button at least 3 seconds and release it to power on Prime One X
device. Note that, the Power LED light will fast flash.