User's Manual

16
If the Custom mode is selected, data of each sample will be printed when this sample is
completed. 【ON】indicates the auto-print is turned on.【OFF】indicates the auto-print is turned
off. The print information such as Device Model, Calibration Date, Serial NO and statistics
(Average, 95%UCL) can be set. The settings of differential/cumulative count mode, particle unit
and size channel are the same as Counting Mode.
OffLine Print
The function and interface of the OffLine Print are similar to the Auto Print.
Export Data
The function and interface of the Export Data are similar to the Auto Print.
Print Language
Chinese and English are supported.
Chart 5-3-10 Counting Mode
5.3.4 Display
Chart 5-3-11 Display
Title
Description
Sampling
Standby
If there is no operation within the set time, the device will be in standby during the sampling. If a
password is selected, username and password should be entered to wake up the device.
Leisure
If there is no operation within the set time, the device will be in standby. If a password is selected,