User's Manual

21
When connecting to the Data Acquisition system of MicronView, enter the IP address of the device. Touch
【Connect】icon to connect to the device. See chart 5-3-20.
Chart 5-3-20 Connect MicronView Data Acquisition system
Connect to an external device is used for setting IP address of an external device which is ready for receiving
the data from the device in the same LAN. The data can be transferred when the IP is set and tested. See chart
5-3-21.
Chart 5-3-21 Connect to an external device
Title
Description
IP
Input the IP address. IP indicates the IP address of the external device (Linux systems) which is
ready for receiving the data from the BAM®S in the same LAN.
Shared folder
Input the NFS (Network File System) shared directory of the external device (Linux systems).
(Note: The share function of the associated device should be turned on.)
Transfer file
Touch this icon to open or close the file transfer function. If “on” is selected, it is divided into two
cases. (a) With external device is connected, the sample data will be transferred to shared
directory during sampling. (b) With no external device is connected, the sample data will be
transferred to temporary directory of BAM®S during sampling.
Click to detect
Touch this icon to detect if the BAM®S can connect with the external device in this LAN. If
touched, the message “Detecting…” appears. If the connection is correct, the message
“Communication successful. Please save the setting.” is displayed. Otherwise, the message “Link
failed” is displayed. When connection failed and Transfer File icon is on, the files can also be
saved, but the files cannot be transferred.
Re-enter
Touch this icon to clear the current content.
Clear File
Touch this icon to clear all the junk files locally cached in the BAM®S. (Note: sample data will not
be affected.
5.3.11 MV Connect
MV connect is used for the collaborative work of BAM®S and BAS by network interconnection. Need to
connect the BAM®S and BAS in the same wireless network. Enter the IP address of BAS that need to be
connected. Set the threshold of the particle/BIO, the threshold can be concentration limit and particle in unit
time, set the time unit and sampling volume. See chart 5-3-21. Touch【Connect】icon to connect the BAM®S