Datasheet

Table 13: Identity Device (Continued)

See Note 1 for setting definitions

Word Bit(s) Setting Default Value Description

84 Command set/feature supported extension

15 F 0b Shall be cleared to zero

14 F 1b Shall be set to one

13 F 1b 1 = IDLE IMMEDIATE with UNLOAD FEATURE supported

12 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)

11 F 0b Reserved for technical report INCITS TR-37-2004 (TLC)

10–9 F 00b Obsolete

8 F 1b 1 = 64-bit Word wide name supported

7 F 0b 1 = WRITE DMA QUEUED FUA EXT command supported

6 F 1b 1 = WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT

commands supported

5 F 1b 1 = General Purpose Logging feature set supported

4 F 0b 1 = Streaming feature set supported

3 F 0b 1 = Media Card Pass Through Command feature set suppor-

ted

2 F 0b 1 = Media serial number supported

1 F 1b 1 = SMART self-test supported

0 F 1b 1 = SMART error logging supported

85 Command set/feature enabled.

15 X 0b Obsolete

14 F 1b 1 = NOP command supported

13 F 1b 1 = READ BUFFER command supported

12 F 1b 1 = WRITE BUFFER command supported

11 X 0b Obsolete

10 V 1b 1 = Host Protected Area feature set enabled

9 F 0b 1 = DEVICE RESET command supported

8 V 0b 1 = SERVICE interrupt enabled

7 V 0b 1 = release interrupt enabled

6 V 1b 1 = look-ahead enabled

5 V 1b 1 = write cache enabled

4 F 0b Shall be cleared to zero to indicate that the PACKET feature

set is not supported.

3 F 1b Power Management feature set is enabled

2 F 0b Obsolete

1 V 0b 1 = Security Mode feature set enabled

0 V 1b 1 = SMART feature set enabled

C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD

Device ID

PDF: 09005aef848722e9

realssd_c400_2_5_sed.pdf - Rev. A 09/11 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.