Datasheet

Table 13: Identity Device (Continued)

See Note 1 for setting definitions

Word Bit(s) Setting Default Value Description

119 Commands and feature sets supported (Continued from

words 84-82)

15 F 0b Shall be cleared to zero

14 F 1b Shall be set to one

13–6 F 00000001b Reserved

5 F 0b 1 = Free-fall Control feature set is supported

4 F 1b 1 = The DOWNLOAD MICROCODE command with mode 3 is

supported

3 F 1b 1 = READ LOG DMA EXT and WRITE LOG DMA EXT com-

mands are supported

2 F 1b 1 = The Write-Read-Verify feature set is supported

1 F 1b 1 = Feature set "Disable Data Transfer After Error Detec-

tion" is supported

0 F 0b Reserved for DDT

120 Commands and feature sets supported or enabled (Contin-

ued from words 87-85)

15 0b Shall be cleared to zero

14 1b Shall be set to one

13–6 00000000b Reserved

5 0b 1 = Free-fall Control feature set is enabled

4 1b 1 = The DOWNLOAD MICROCODE command with mode 3 is

supported

3 1b 1 = The READ LOG DMA EXT and WRITE LOG DMA EXT

commands are supported

2 1b 1 = The WRITE UNCORRECTABLE EXT command is supported

1 0b 1 = The Write-Read-Verify feature set is enabled

0 0b 1= Feature set "Disable Data Transfer After Error Detection"

is enabled

0 = Feature set "Disable Data Transfer After Error Detec-

tion" is disabled

121 F 0000h 0000h

0000h 0000h

Reserved for expanded supported and enabled settings

127 (O) 0000h Obsolete

C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD

Device ID

PDF: 09005aef848722e9

realssd_c400_2_5_sed.pdf - Rev. A 09/11 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.