Datasheet

Logical Block Address Configuration
The drive is set to report the number of logical block addresses (LBA) that will ensure
sufficient storage space for the specified density. Standard LBA settings, based on the
IDEMA standard (LBA1-02), are shown below.
Table 1: Standard LBA Settings
Drive Size
Total LBA Max LBA
User Available
Bytes
Decimal Hexadecimal Decimal Hexadecimal (Unformatted)
128GB 250,069,680 EE7C2B0 250,069,679 EE7C2AF 128,035,676,160
256GB 500,118,192 1DCF32B0 500,118,191 1DCF32AF 256,186,209,271
512GB 1,000,215,216 3B9E12B0 1,000,215,215 3B9E12AF 512,110,190,592
Physical Configuration
Table 2: 2.5-Inch Dimensions and Weight
Value
UnitHeight: 9.5mm Height: 7mm
Width 69.85 69.85 mm (NOM)
Length 100.50 100.50 mm (NOM)
Unit weight 75 73 g (MAX)
C400 2.5-Inch NAND Flash Self-Encrypting Drive SSD
Logical Block Address Configuration
PDF: 09005aef848722e9
realssd_c400_2_5_sed.pdf - Rev. A 09/11 EN
4
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.