Network Router User Manual

3.3 DHCP mode

Step 1. To configuration the IP address of SP5001/S for DHCP Mode, click Network

Interface on the navigation panel. In the Network Interface screen, enable the

DHCP function if you are using the cable modem or DHCP server and click

the OK button.

Figure 7. Network Interface

Step 2. Click Commit Data on the navigation panel. In the Commit Data screen, click

the Commit button.

Step 3. Click Reboot Data on the navigation panel. In the Reboot FXS System screen,

click the Reboot button. It will take 40 seconds to reboot.

Step 4. Close the current browser windows and launch your web browser again.

Enter the new IP address in the Location or Address field. Press [Enter].