Network Router User Manual

4. Making a VoIP Call

This Chapter covers the basic configuration the gateway for making VoIP calls. One is

the Peer-to-Peer mode, another is Proxy routed mode. The configurations and

functions are different. Please make sure about the mode you want and follow up the

step to configure your gateway.

4.1 Configure the gateway into the Peer-to-Peer mode

Step 1. To Configuration the SIP Configuration of SP5001/S, click SIP Information

on the navigation panel. In the SIP Information screen, select Peer-to-Peer

Mode function, set line number (e.g. Line1 Number: 60927) and click the

OK button.

Figure 9. SIP Configuration – Peer to Peer mode Screen

Step 2. To configuration the Phone Book of SP5001/S, click Phone Book on the

navigation panel. In the Phone Book screen, enter the Index, Name, IP

address and e164 (phone number) of the destination and click the Add

Data button.