Network Router User Manual

49
19. Command List
This chapter introduces the command line interface and lists all of the commands.
19.1 Hyper Terminal Setting
A terminal emulator is needed when using RS-232 port to configure SP5001/S. Here,
we use Microsoft HyperTerminal to depict how to set up terminal emulator:
Step 1. Execute the Hyper Terminal program, and then the following windows will
pop-up on the screen. (STARTàProgram filesà Accessoriesà
CommunicationàHyper Terminal)
Figure 30. Hyper Terminal Setting
Step 2. Define a name such as SP5001 for this new connection.
Figure 31. Connection Description