Network Router User Manual

Expires:3600

Registering to: Sip:80.248.33.37 with the following :

To:sip:sipcenter1165@80.248.33.37

From:sip:sipcenter1165@80.248.33.37

Contact:sip:sipcenter1165@210.59.163.143

Expires:3600

Account: sipcenter1123 registration succeeded

Account: sipcenter1165 registration succeeded

AC4804[0] is ok

successful

Initialize OSS libraries...OK!

VP v1.40 stack open successfully.

19.4.2 Peer-to-Peer Mode

Peer-to-Peer Mode allows users to call other VoIP devices without the proxy

server. When in Peer-To -Peer mode, SP5001/S will send INVITE message

directly to the destination IP address once the dial is finished. One can use

PhoneBook, which will dial predefined phone number, and press “#” (optional,

to accelerate the dial) as end of dial. Or, users can use SpeedDial button,

which is mapping to user defined PhoneBook, Button1 to PhoneBookIndex1,

and Button2 to PhoneBookIndex2…etc..

To configure Peer-To -Peer Mode in SP5001/S, follow the steps below:

Step 1. Set Peer-To -Peer Mode, using “h323” command

usr/config$ sip –mode 0

Note: mode 0 is for Peer-To -Peer mode, while mode 1 is for Proxy mode.

Step 2. Configure PhoneBook, using “pbook” command.

Users can refer to chapter 19.7.9 [pbook] command for more information.

usr/config$ pbook –add name TEST1 ip 10.1.1.1 e164 10