Network Router User Manual

71
SP5001/S will give each record a automatic sequence number as
index.
-add add a new record to phone book. When adding a record, users
have to specify name, IP, and e164 number to complete the
command.
-search search a record in phone book. The searching criteria can be
name, IP, or e164.
-delete delete a specific record. “pbook –delete 3” means delete index 3
record.
-insert add a new record and force to assign a specific index number for
it.
-modify modify an existing record. When using this command, users have
to specify the record’s index number, and then make the change.
PhoneBook Rules:
The e164 number defined in phone book will fully carry to destination. It is not
just a representative number for destination’s IP Address. In other words, user
dial this e164 number to reach destination, destination will receive the number
and find out if it is matched to its e164, including Line number in some
particular device.
usr/config$ pbook -print
index Name IP E164
==================================================================
=
1 test1 192.168.4.73 200
------------------------------------------------------------------
-
usr/config$
Figure 49. pbook –print command list