Network Router User Manual

of the registration information.

-port SIP local UDP port which uses to listen incoming SIP Messages.

-rtp Specify the RTP received port number.

Note: One will need to configure port and rtp parameters only

when you deploy two or more sets behind the IP sharing device.

usr/config$ sip -print

Run Mode : PROXY MODE

Proxy address : 10.1.1.2

Proxy port : 5060

Domain : null

Prefix string : null

Line1 : 1001

SIP listen port : 5060

RTP receive port : 16384

Expire : 3600

usr/config$

Figure 55. sip –print command list