Hardware Guide

Rev. 3 Micronet SmartCAM™ - Hardware Guide 23 / 47
Figure 7: Micronet SmartCAM Standard & Intermediate Model Cable Pinout
Power Connector
The power connector (marked as P1) is a 4-pin, 2 row MicroFit 3.0 series Molex male connector and the
pinout for power and ignition lines are described in figure 8 below:
Figure 8: Molex 4-Pin Male Connector
Power Consumption
Table 3: Micronet SmartCAM™ Standard Current Consumption
Micronet SmartCAM™ Standard Current Consumption
12V
24V
3mA
3mA
批注 [BS4]: Need this info, we don’t have a
SmartCAM™