Hardware Guide

Rev. 1 Micronet SmartCAM™ - Hardware Guide 16 / 50
System, Driver, and IR LEDs
The Micronet SmartCAM™ has two LEDs, one tri-color system status LED (located on the left side), and
another driver feedback LED located at the top of the in-cabin facing panel. The Micronet SmartCAM™
also has a configurable Infrared (IR) LED ring which can be used for driver detection via heat sensing in
addition to the light-sensing LED for similar functionality.
Multipurpose Button
The Micronet SmartCAM™ has a multipurpose button that can be configured to power ON/OFF the
device or other customer functions.
Cameras
Road-Facing Camera
The Micronet SmartCAM™ has a 2 MP, Full HD (1080p) autofocus road-facing camera with autofocus,
which has low light sensitivity, 120 dB of dynamic range in HDR mode, 110° Field of Vision (FOV), and
runs at 30 frames per second (FPS).
Cabin-Facing Camera
The Micronet SmartCAM™ has a 2 MP, Full HD (1080p) autofocus cabin-facing camera with Near-
Infrared Sensitivity and IR LEDs, very wide dynamic range (for multiple exposures), a 140° FOV, and
run at 60 FPS.
Sound
Internal Speaker
The Micronet SmartCAM™ has a 1-Watt integrated speaker located on the in-cabin facing panel.
Microphone
The platform also has a highly sensitive microphone located at the bottom of the right panel.
Connectivity
Wireless LAN
The Micronet SmartCAM™ provides a dual-mode Wireless Local Area Network (IEEE 802.11 b/g/n/ac)
2.4 or 5 GHz module.
Wireless LAN communication is especially suited for high-speed data transfer over the air when a
hotspot infrastructure exists. For applications that require large data transactions, wireless LAN is the
most economical way to implement the solution.