Hardware Guide

Rev. 1 Micronet SmartCAM™ - Hardware Guide 19 / 50
power source. After disconnecting, the power source from the SmartCAM™ battery reconnects and
provides power to CPU. This mechanism prolongs the life of the battery.
Charging Temperature
The Micronet SmartCAM™ battery charging temperature is as follows:
• Battery operating temperature: 0°C to ~ +70°C, 45~85% RH
• Charge: 0°C to ~ +45°C, 45~85% RH
Motion Control
The Micronet SmartCAM™ provides an accelerometer, compass, and gyroscope module. The
accelerometer is an electromechanical device used to measure acceleration forces. Such forces may be
static like the continuous force of gravity or, as is the case with many mobile devices, dynamic to sense
movement or vibrations.
Communication Interfaces
Serial Communication
The Micronet SmartCAM™ provides serial communication ports with both the standard and enhanced
models. Each model includes a single serial port for communication and a serial debug port for
debugging.
Please refer to the detailed description of the Standard, Intermediate, and Enhanced Serial
Communication.
USB Communication
The Micronet SmartCAM™ supports a USB Type-C interface; it located on the Micronet SmartCAM™ Top
View of the device.
The SmartCAM™ standard supports USB Client interface for ADB communication. The enhanced support
two USB communication ports, one USB Host and one USB Client device. Please refer to the detailed
description of the standard USB Communication and of the enhanced USB Communication.
The operating system blocks charging when the temperature is over the defined
(45°C). By this function the device is protected even while in operation.
NOTE:
The product can connect only to a USB 3.0 or 2.0 interface (no superspeed).