Hardware Guide

z
Rev. 3 Micronet SmartCAM™ - Hardware Guide 22 / 50
5. Standard Model
Overview
The Standard (Basic) model of the SmartCAM™ includes a basic set of interfaces including power, ground,
ignition, serial communication as well as serial debug ports, and GPIOs.
Functional Details
The Micronet SmartCAM™ standard provides the following interfaces:
• 12V/24V line to charge the Micronet SmartCAM™ battery
• Digital input signal for ignition switch control
• A single automotive input and an open-collector output
• USB Type-C for ADB connection
• Serial communication and serial debug ports
Standard Cradle Dev Cable
The Micronet SmarTab 8 standard cradle development cable, shown in figure 6 below, exposes power,
ignition, USB Type-C, a serial communication line and a serial debug line, and two GPIOs.
Figure 6: Micronet SmartCAM Standard & Intermediate Model Cable Harness GCAB516.
The pinout for P1, P2, and P3 is displayed in the standard cradle pinout in Figure 7 below: