Hardware Guide

z
Rev. 3 Micronet SmartCAM™ - Hardware Guide 26 / 50
6. Intermediate Model
Overview
The Intermediate model of the SmartCAM™ has all of the same functionality and pinouts as the Standard
model; however, it also has 4G LTE cellular data enabled for backend server updates and statistics.
Functional Details
The Micronet SmartCAM™ intermediate model provides the following interfaces:
• 12V/24V line to charge the Micronet SmartCAM™ battery
• Digital input signal for ignition switch control
• An automotive input, and an open-collector output
• USB Type-C for ADB connection
• Serial communication port and serial debug port
Standard & Intermediate Model Dev Cable
The Micronet SmartCAM standard and Intermediate development cable, shown in figure 9 below,
exposes power, ignition, a serial communication line and a serial debug line, and two GPIOs:
Figure 9: Micronet SmartCAM Standard & Intermediate Model Cable Harness GCAB516.
The pinout for P1, P2, and P3 is displayed in the standard cradle pinout in Figure 10 below: