Manualshelf

Hardware Guide

ManualsBrandsMicronet ManualsElectronicsMicronet SmartCam
31323334353637383940
z
Rev. 3 Micronet SmartCAMâ„¢ - Hardware Guide 31 / 50
Figure 12: Micronet SmartCAM Enhanced Model Cable Drawing (P/N: GCAB618).
The pinouts for P2 – P6 are displayed in the enhanced cradle pinout in Figure 13 below:
Figure 13: Micronet SmartCAM Enhanced Model Cable Pinout
Vehicle Bus Connectivity
CANbus Connector
The CANbus connector (marked as P2) is a 10-pin, 2 row MicroFit 3.0 series Molex male connector, shown
in figure 14 below, which provides CAN 1 HIGH/LOW, CAN 2 HIGH/LOW, J1708, and Single Wire CAN: