Hardware Guide

Rev. 1 Micronet SmartCAM™ - Hardware Guide 8 / 50

With a rich set of wireless and wired interfaces – Wi-Fi hotspot, BT tethering and BLE, Bluetooth audio,

NFC, Wi-Fi Direct, multiple CAN channels (including open/customizable CAN libraries), and multiple I/Os

– the Micronet SmartCAM™ can function as an in-cabin hub to easily connect with other devices,

sensors, and accessories. Driver notification features such as system status LEDs, warning indicators,

internal speakers, and microphone are also provided for device control and driver alerting purposes.

The Micronet SmartCAM™ lets drivers remain safe, effective, and efficient with on-the-go connectivity –

anytime and anywhere – using cellular communication and Wi-Fi. Its durable design withstands shocks

and a range of temperatures, allowing drivers to operate freely in any environment. Installed on the

windshield, the Micronet SmartCAM™ has a perfect view of the road and the cabin.

The Micronet SmartCAM™ is a superior and cost-effective solution for Video Telematics.

Micronet SmartCAM Models

Micronet has implemented the SmartCAM™ platform in three product variants: The Basic Model, an

Intermediate Model, and Enhanced Model. These models include powerful computing, extended

memory, GPS, Wi-Fi, Bluetooth, NFC, and more. In addition, each model supports a set of additional

features:

• Basic Model – provides support for 2 cameras, a QC SDM450 chipset (2GB/16GB memory), and

additional storage for DVR recording. This model is described in more detail in the Basic Model.

• Intermediate Model – In addition to the Basic Model, the Intermediate Model provides 4G LTE.

• Enhanced Model - provides basic + enhanced key features set, described in Enhanced Model

list below.

The following Table 1 distinguishes each model for their specific components:

Table 1: Micronet SmartCAM™ Models

Basic

Intermediate

Premium (V2)

CAN BUS

J1939/J1708

Cellular

3G/HSPA+/4G LTE

USB interface

Debug / Download

Hub (OTG)

Memory

RAM/Flash

2GB/16GB