Installation guide

3
Introduction
Welcome, and thank you for purchasing DataDock II eSATA+USB
High Capacity Hard Disk from Fantom Drives.
In photos and illustrations in this guide, The following alert symbols
are used in this guide:
This signifies important
information for ALL users.
This signifies important infor-
mation for USB 2.0 users.
This signifies important infor-
mation for eSATA users.
This signifies important infor-
mation for FireWire users.
The DataDock II Hard Disk can only sustain one connection type
at any given time; the drive will appear as an eSATA device when
connected via eSATA, a FireWire device when connected via
FireWire, and as a USB device if the USB cable is connected.
USB 2.0 compatibility with USB 1.x
USB 2.0 ports are backward compatible with USB 1.x. However,
if you connect the Drive to a USB 1.x port, it will operate at
USB 1.x speeds.
System Requirements
• Power Macintosh G4 or newer running Mac OS X 10.4 or newer
• 733 MHz Pentium 3 class PC or faster CPU running Windows XP
SP2, 2003, or Vista
• An available eSATA Port or
• An available USB 1.1 or 2.0 port or
• An available FireWire 400 port or
• An available FireWire 800 port