User`s guide

Configuring
3-19
3.6 Raid Set Functions
Use the Raid Set Function and Volume Set Function if you prefer to customize
your system. User manual configuration can full control of the raid set setting,
but it will take longer to complete than the Quick Volume/Raid Setup
configuration. Select the Raid Set Function to manually configure the raid set
for the first time or deletes existing raid set and reconfigures the raid set. A
raid set is a group of disks containing one or more volume sets.
3.6.1 Create Raid Set
To create a raid set, click on the Create Raid Set link. A “Select The Drive
For RAID Set” screen is displayed showing the drive connected to the current
controller. Click on the selected physical drives with the current raid set. Enter
1 to 15 alphanumeric characters to define a unique identifier for a raid set. The
default raid set name will always appear as Raid Set. #.
Tick on the Confirm The Operation and click on the Submit button in the
screen, the raid set will start to initialize.