Specifications

5.3 Bracket Mounting (Preferred Method)

This method allows for the easy removal of a display as and when

required, for either security reasons or to prevent damage or discomfort

whilst not in use.

1. Using the three supplied M4 bolts attach the back plate to the rear of

the display (Fig.1).

2. Drill three 2.5mm holes marked "A" on the Template and using the

supplied self tapping screws, screw the clip bracket to the mounting

surface (Fig.2).

3. Place the display flat against the bracket slightly higher than the final

position and slide gently down into position. There will be a small

click as the bracket secures the display into position (Fig.3).

4. To release the display press lightly on the bracket tab and slide the

display upwards (Fig.4).

mn100 Analogue Display