User manual
4
3
1 2
Package Contents
Please check the package contains the following items listed below.
Indroduction
Micronet SP5591A HD1080p Bullet IP Camera is capable of serving 
real-time streaming and makes image quality more smoothly. In 
addition to MJPEG real time streaming, this camera develops H.264 
codec to apply for high resolution digital broadcast.
With sophisticated mechanical design plus cable management, the 
HD1080p Bullet IP Camera is easy installed and aesthetic. 
Features
Progressive Scan CMOS Sensor
Dual Streams, HD1080p + 720p real-time
H.264 and MJPEG compression
Motion Detection
Privacy Masks
WDR
Smart Picture Quality/3DNR
Tampering Alarm
Day/Night (ICR)
Micro SD Support
IR LED 
Weatherproof (IP66 International)
Sunshield
ONVIF Support
Camera   Connectors
Quick Guide
 CD (bundled software
and documentation)
System Requirements
To perform the IP Camera via web browser, please ensure your PC 
is in good network connection, and meet system requirements as 
described below. 
Items
Personal 
Computer
Operating 
System
Web 
Browser
Network 
Card
Viewer
System Requirement
®® ®TM
Intel Pentium  M, 2.16 GHz or Intel  Core 2 Duo, 2.0 GHz
2 GB RAM or above
Windows XP / VISTA / 7
Microsoft Internet Explorer 6.0 or  above
Firefox, Chrome, Safari
10Base-T (10 Mbps) or 100Base-TX (100  Mbps) operation
or above
ActiveX control plug-in for Microsoft  IE
M4 Self Tapping
Screws 
Plastic Screw 
Anchors 
Power Terminal 
Block 
M4 Inner 
Hex Wrench 
5
1
Step 1: Bullet IP Camera Installation  
Please follow the instructions below to complete Bullet IP Camera 
installation.
Power up the Camera
To power up the Bullet IP Camera, please plug the DC 12V cable 
into the Camera's power terminal block. Alternatively, connect the 
Ethernet cable to the camera's PoE port and plug the other end of 
the cable into a PoE switch. 
NOTE: If using PoE, make sure Power Sourcing Equipment 
(PSE) is in use in the network.
Ethernet Cable Connection
Connect one end of the CAT5 Ethernet cable to the RJ-45 
connector of the Bullet IP Camera, and the other end of the cable to 
the network switch or PC.
NOTE: In some cases, you may need to use an Ethernet 
crossover cable when connecting the Bullet IP Camera 
directly to the PC.
NOTE: Check the status of the link indicator and activity 
indicator LEDs; if the LEDs are unlit, please check 
LAN connection.
Green Link Light indicates good network connection. 
Orange Activity Light flashes for network activity indication.
NOTE: 
NOTE: 
NOTE: 
NOTE: 
NOTE: 
NOTE: 
NOTE: 
NOTE: 
NOTE: 
NOTE: 
1
5
Bullet IP Camera
 (Cable included)
1
2
Green
Pink
3
4
5
Cable
1 Alarm
2 Network 
 (with PoE) 
3 Audio I/O
4 Power
5 BNC 
Pin No.
1
2
3
4
_
Pink
Green
1
2
3
_
Definition
ALM_IN
ALM_IN
ALM_OUT
ALM_OUT
RJ-45 connector with LED
Line In/ Mic In
Line Out
DC 12V-1
GND
DC 12V-2
Analog Video Output
Remarks
Alarm connection
Power connection
Two-way audio 
transmission
DC (-)
Reserved
DC (+)
Desiccant 


