Specifications

TECHNICAL CHARACTERISTICS
OPTIONAL ACCESSORIES
CUSTOMISATION
4 STANDARD SIZES
Vertical 45, 65 or 100 cm
in height or horizontal (desktop)
45 cm wide
CONNECTION FITTING
to secure a tubular duct for the
power supply or for stacking additional
towers (up to 3 pieces) if required
QUICK ASSEMBLY
Pre-cabled sockets
and mating assembly system
minimise the use of tools
ALUMINIUM
Aluminium frame, module
kit in high isolation, tough,
long life thermoplastic
RJ45 SOCKET UP TO CAT. 6A
RJ45 (8 pin) telecommunications
sockets with cat. 5e screening
in cabled version, category 6
and 6A in installation version
PLATE
in steel for use where greater
stability is required
CABLE REE
fitted on the side of the tower
to house any excess cable
STANDARDS
Supplied with Italian/German standard
sockets, also available with English
and French sockets, and RJ45
telecommunications sockets
CAVITY FLOORS
Ideal for cavity floors,
since connections can be
routed beneath the floor
ALSO PRE-CABLED!
The entire series
is also available pre-cabled
and ready for use
TWO CABLE OUTLET OPTIONS
Cable outlet on bottom
of base or on rear
of tower
1 2 3 4 5 6 7
On request Tower Tech can be expanded with:
On request Tower Tech can be customised with:
CONNECTION FITTING
Code 40791
Technopolymer quick fitting with
hole Ø 20.5 mm for securing a ri-
gid tubular duct for the power
supply or for stacking additional
towers (up to 3) by installing a
connection fitting (e.g. rigid duct
d. 20 mm) inside.
CABLE REEL
Code 40790
Fitted on the sides of the tower to
house any excess cable leading
from the users. It is in rubber-
coated impact-resistant techno-
polymer. Capacity up to 1.5/2 m
of cable depending on type.
PLATE
Code 40792
Steel plate for use where greater
stability is required.
1) Double-pitch Italian 10A/16A+E sockets;
2) Dedicated UPS line sockets;
3) Two-position lamp switch;
4) Overvoltage protection (two-position lamp switch);
5) Thermal cutout with warning lamp;
6) Sat-TV reception sockets;
7) Cat. 3 RJ12 telecommunications sockets.