User`s manual

- 1 -
1 Overview
1.1 Introduction
Thank you for purchasing Micronet SP916GL Wireless Broadband Router
with 4-port Fast Ethernet Switch for cable and DSL application.
SP916GL is the perfect device to connect a small group of PCs to a
high-speed Broadband Internet connection or to an Ethernet backbone.
Configurable as a DHCP server, SP916GL acts as the only externally
recognized Internet device on your local area network (LAN). It could serve
as an Internet firewall, protecting your network from being accessed by
outside users. In addition, SP916GL supports 64-bit and optional 128-bit
Wired Equivalent Privacy (WEP) and WPA/WPA2 (802.1x, TKIP, AES) to
protect your WLAN network.
SP916GL offers data rate up to 108Mbps, almost 10 times faster than the
widely deployed 802.11b products found in homes, businesses, and public
wireless hotspots around the country — but since they share the same
2.4GHz radio band, these devices can also work with existing 11Mbps
wireless devices.
This user guide is aimed at easy installation procedures of this device.
Before your installation, please read the following procedures carefully.
1.2 Package Content
Before you start installing the product, please verify the following items are in
the package：
 Micronet SP916GL Wireless Broadband Router
 Quick Installation Guide
 Manual CD
 One network cable (RJ-45 Category 3 or 5 UTP/STP)
 Power Adapter(9VDC above1.5A)
 External Antenna
1.3 Product Feature
Router Mode
 PPP over Ethernet (RFC-2516)
 DHCP Server and Client
 PPTP Client
 NAPT (Network Address and Port Translation)
 NAT (Network Address Translation)
 ICMP (Internet Control Message Protocol)