User's Manual

19
System Status Tab
The System Status Tab is primarily ulized to provide valuable system status informaon to the installer.
System Informaon: The rst row contains informaon about the status and health of the hub. This includes a
graph showing temperature, disk space, rmware version, etc.
Camera Informaon: These rows provide valuable performance informaon regarding the specic camera
indicated. Most importantly, the baery level, Bandwidth usage, and Signal Strength.
Desired Signal Strength Levels: For best performance, we nd that the signal strengths should indicate at least
-70dB or stronger. (-60dB is considerably STRONGER than -70dB, ‘lower’ numbers are beer)
Firmware Update: In the event that there is a rmware update available for your camera, it will be indicated
here. Clicking the buon will push the update out to the camera via the wireless link. (You do not have to visit the
camera in person) Please call MicroPower Technologies with any quesons prior to updang your cameras.
Note: The above digram is from a (2) camera system. More or less cameras will display (scroll down) depending on your installaon.