User's Manual
Table Of Contents
- Package Contents
- MicroPower System Overview
- Getting Started - First Steps
- Receiverx Installation
- Receiverx System Setup
- Camera Kit Assembly & Installation
- Camera System Installation / Mounting
- Focusing and Adjusting The Camera
- VMS Integration
- FAQ
- Trouble Shooting
MicroPower Technologies
1-877-536-0128 | micropower.com
28
Powering On The Camera
Once you have the antenna cable and solar power cable aached, you may then power on the camera by
connecng the baery plug inside the camera. IR enabled cameras will have (2) baery plugs that must be
connected (or disconnected to power o the camera)
Baery cables connect together to power on the camera.
• Standard Non-IR cameras have (1) power connector.
• Cameras equipped with IR Illuminators will have (2) power connectors,
both of which must be connected for reliable long-term operaon.
USB Port used for focusing the camera with a
small Windows 7 or Windows 8 or OSX PC
This is a USB 3.0 port, however you can easily
connect a standard Micro USB 2.0 connector
into the (larger) right secon of the socket.