User's Manual
Table Of Contents
- Package Contents
- MicroPower System Overview
- Getting Started - First Steps
- Receiverx Installation
- Receiverx System Setup
- Camera Kit Assembly & Installation
- Camera System Installation / Mounting
- Focusing and Adjusting The Camera
- VMS Integration
- FAQ
- Trouble Shooting
MicroPower Technologies
1-877-536-0128 | micropower.com
6
Hub Connecon Method
RTSP Streaming
The hub communicates to your VMS using h.264 RTSP streaming. In order to operate correctly, an IP address will
be needed for the hub, plus, and addional IP address will be ulized to represent each camera on the hub.
To access the individual video streams, one will use the unique IP of the camera, while the trailing URL remains
consistent. (See illustraon on right)
In the event of a camera outage, the IP address represenng that camera can be disabled aer a user dened
period of me. This allows a VMS system to detect the camera loss (IP is no longer accessible, and can no longer be
pinged) and send the appropriate alerts or scripted acons.
Note that the individual cameras are never actually a part of a given computer network. The IP addresses are
operated and maintained 100% inside the hub, and only represent the camera video streams.
NOTE: When segn up a camera, you should enter the IP address of each Solveil camera at that me. Do not
leave the eld blank or use the same IP address that is assigned to the hub.
Ethernet Switch
VMS Server
VMS Display Monitor
Antennas
Antennas
Antennas
MiniHub
rtsp://192.168.1.101:554/h264/1/media.amp/trackID=1
http://192.168.0.100
http://192.168.0.105
rtsp://192.168.1.102:554/h264/1/media.amp/trackID=1
rtsp://192.168.1.103:554/h264/1/media.amp/trackID=1