User manual

EZ Match User Manual
8-3
I/O Parameters
I/O Parameters Serial Commands
Power On/Reset Counts
<K406,power-on,resets,power-on saves,power-on flash saves,
power-on tube/cap library saves>
Time Since Reset <K407,hours,minutes>
Service Message <K409,status,service message,threshold,resolution>
Serial Verification
<K701,serial command echo status,serial command beep status,
control/hex output>
Beeper <K702,status>
Quality Output <K704,quality output separator,decodes/trigger status>
Symbol Data Output <K705,symbol data output status,when to output>
Read Duration Output <K706,status,separator>
No Read Message <K714,status,message>
Bad Symbol Message <K715,[unused],message>
No Symbol Message <K716,[unused],message>
1D/Stacked Symbology Qualification
<K717,minimum number of bars,minimum number of qualified
scan lines,start/stop status>
2D Symbology Qualification
<K718,finder pattern status,symbol size status,symbol size 1,
symbol size 2,symbol size tolerance,dimension status,dimension
1,dimension 2,dimension tolerance,orientation status,orientation
value>
Frame Information <K734,output frame number,output coordinates>
LED Configuration <K737,LED mode,ISO/IEC 16022 grade>
Image Output
<K739,image output mode,communication port,file format,JPEG
quality>
Target/Flood LEDs
<K750,green flash LED status,target pattern LED status,green
flash duration>
EZ Trax Output
<K757,status,comm port,image mode,image format, JPEG quality,
object info output,grade output,color>
Database Identifier Output <K759,status,separator>
EZ Button
< K770, global status,default on power-on,load IP database, save for
power-on>
EZ Button Modes <K771,single beep,two beeps,three beeps,four beeps>
Trend Analysis Output 1
<K780,trend analysis mode,number of triggers,number to output
on,decodes/trigger threshold>
Trend Analysis Output 2
<K781,trend analysis mode,number of triggers,number to output
on,decodes/trigger threshold>
Trend Analysis Output 3
<K782,trend analysis mode,number of triggers,number to output
on,decodes/trigger threshold>
Diagnostics Output 1 <K790,unused 1,service unit>
Diagnostics Output 2 <K791,unused 1,service unit>
Diagnostics Output 3 <K792,unused 1,service unit>
ISO/IEC 16022 Symbol Quality Output 1
<K800,output on symbol contrast,symbol contrast threshold,output
on print growth,print growth threshold,output on axial non-uniformity,
axial non-uniformity threshold,output on unused ECC,unused ECC
threshold>