User manual

EZ Match User Manual
1-9
Quick Start
Step 7 — Locate the Object in the Field of View
Locate the Object by ESP
•In ESP’s EZ Mode, click the Locate button to enable the blue target pattern.
The object in the field of view will appear in the video view beneath the Locate and
Calibrate buttons, and you will see the blue target pattern projected from the front of the imager.
• Center the target pattern on the object.
At 2 to 3 inches, the pattern resembles an X. At 3 to 6 inches, the pattern resembles a V
.
Important: The entire object of interest (tube, cap, or symbol) should fall within the field
of view (FOV) of the imager. The field of view is what appears in ESP’s Locate/Calibrate
window in EZ Mode.
• Click the Stop button to end the Locate function.
Center on object
in field of view.
Target pattern shown as it would appear between 3 and 6 inches.