User manual

EZ Match User Manual
8-51
I/O Parameters
Database Identifier Output
Output Status
Disabled
When this command is disabled, no database identifier information will be output.
Enabled
When this command is enabled, the imager will append a two-digit number and the char-
acters “DB” to the data output following the separator for each symbol decoded using IP
Database. For example, if the separator is an underscore character and the second data-
base entry reads a symbol encoded with “data capture” during the read cycle, the symbol
data output will be “data capture_DB02”. If the database is not active, no identifiers will be
attached to output.
Separator
Important: The ASCII characters < , > , and , can only be entered as hex pairs:
For <: <K759h,,3C>
For >: <K759h,,3E>
For
, : <K759h,,2C>
See ASCII Character Entry Modifier on page 4-33 for a detailed explanation of how to
enter ASCII characters as hex values.
Usage: Useful in keeping track of which database entries read which symbols.
Serial Cmd: <K759,status,separator>
Default: 0
Options: 0 = Disabled 1 = Enabled
Usage:
The separator character separates the symbol data from the database identifier.
Serial Cmd: <K759,status,separator>
Default: <space>
Options: Any ASCII character