User manual

8-58
EZ Match User Manual
EZ Trax Output
Image Format
Lossless
A “lossless” image is one that is in a high resolution format, and that will not lose resolution
even when manipulated and saved multiple times. When Lossless is enabled, the JPEG
Quality setting has no effect.
Compressed
Outputs the image in JPEG format. Image quality is determined by the JPEG Quality
setting.
JPEG Quality
Object Info Output
Grade Output
Definition: Selects the format of the image output file.
Serial Cmd: <K757,status,comm port,image mode,image format,JPEG quality,object
info output,grade output,color>
Default: Compressed
Options: 0 = Lossless 1 = Compressed
Definition: Sets the amount of JPEG image compression. A value of 1 represents the
highest compression and lowest image quality, and 100 represents the
lowest compression and highest image quality.
Serial Cmd: <K757,status,comm port,image mode,image format,JPEG quality,object
info output,grade output,color>
Default: 90
Options: 1 to 100 (percent)
Definition: If a symbol is decoded during an image capture, the symbol type and other
supplementary symbol information is also included.
Serial Cmd: <K757,status,comm port,image mode,image format,JPEG quality,object
info output,grade output,color>
Default: Disabled
Options: 0 = Disabled 1 = Enabled
Definition: Symbol quality information will be output in the form of an abbreviated
identifier for each read cycle.
Serial Cmd: <K757,status,comm port,image mode,image format,JPEG quality,object
info output,grade output,color>
Default: Disabled
Options: 0 = Disabled 1 = Enabled